This patch adds help messages for -l, -m and -q options.
Also it swaps -h for -v because ptp4l's help is this order.
Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com>
ERANGE is used by the kernel to indicate the hardware does not support the
requested time stamping mode. Explain this error to the user.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Add kernel_leap option for ptp4l and -x option for phc2sys to disable
setting of the STA_INS/STA_DEL bit to slowly correct the one-second
offset by servo.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Extend the clock_utc_correct function to handle leap seconds announced
in the time properties data set. With software time stamping, it sets the
STA_INS/STA_DEL bit for the system clock. Clock updates are suspended
in the last second of the day.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Update the currentUtcOffset and leap61/59 values at one minute
interval. When a leap second is detected, set the STA_INS/STA_DEL
bit for the system clock.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Modify the pmc to allow non-blocking operation. Run it on each clock
update to have the sync offset updated from currentUtcOffset with every
other call.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Handle reception of >=3 sequential multiple pdelay responses from
distinct peers as a fault of type FT_BAD_PEER_NETWORK.
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
This patch also changes port_capable() to reset the port's nrate every time asCapable changes
from true to false.
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
If messages are not freed, it is possible (with purposely crafted traffic) to trigger
a peer delay calculation which will use message's data from the previous round.
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
The 'struct ptp_message" includes a 64 bit integer field, ts.pdu.sec,
and this must be aligned to an eight byte boundary for armv5 machines.
Although the compiler puts the field at the right offset, we spoil this
by packing the struct with 20 bytes of head room. This patch fixes the
issue by realigning the message buffer.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Many of the single field management messages have just two bytes, one for
the data value and one for padding. This patch adds a structure that can
be used for all of these management IDs.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Modifies existing structs changing Octet *foo -> Octet foo[0] and
marks them PACKED so the message buffer can be cast to the structs.
Signed-off-by: Geoff Salmon <gsalmon@se-instruments.com>
These flexible TLVs don't need to be represented as a single packed
struct directly in the message buffer. Instead a separate struct
contains pointers to the individual parts of the TLV in the message
buffer. The flexible TLV can only be the last TLV in a message.
Signed-off-by: Geoff Salmon <gsalmon@se-instruments.com>
New clock options should go into 'struct default_ds' so that we can avoid
growing clock_create indefinitely.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Add new options to ptp4l and phc2sys to print summary statistics of the
clock instead of the individual samples.
[ RC - Fix () function prototype with (void).
- Use unsigned for sample counter.
- Fix over-zealous line breaks. ]
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
If the delay is known, print it together with the offset and frequency.
Remove the time stamp from the output to fit it into 80 chars.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Change the label of the frequency offset in the clock messages printed
by ptp4l and phc2sys from "adj" to "freq" to indicate it's a frequency
value.
Also, modify clock_no_adjust() to print the frequency offset instead of
the ratio and use PRId64 instead of lld to print int64_t values.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
The clock_sync_interval() function is called when logSyncInterval
changes from zero. Call it also when the clock is created to have
fest.max_count set accordingly to freq_est_interval even with zero
logSyncInterval.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Ken ICHIKAWA
Jiri Benc
Richard Cochran
Miroslav Lichvar
Delio Brignoli
Geoff Salmon