Before calculating the clock drift in the PI servo, make sure
the first sample is older than the second sample to avoid getting
invalid drift or NaN.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Use pr_* functions to print messages and add -m, -q, -l options to allow
configuration of the printing level and where should be the messages sent.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Add a batch mode, where the commands are taken from the command line
instead of the standard input.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
When a port makes a transition from one state to another, it resets all of
the message timers. While this is the correct behavior for E2E mode, the
P2P mode requires sending peer delay requests most of the time.
Even though all the other timer logic is identical, still making an
exception for P2P mode would make the code even harder to follow. So this
patch introduces two nearly identical helper functions to handle timer
reprogramming during a state transition.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Now that there are clock/port_management_set functions, the IDs that
GETs are handled for, like DEFUALT_DATA_SET, still need to be in the
case for sending NOT_SUPPORTED errors.
Signed-off-by: Geoff Salmon <gsalmon@se-instruments.com>
Adds port_management_send_error and clock_management_send_error to
avoid repeatedly checking the result of port_managment_send_error and
calling pr_err if it failed. Future patches send more mgmt errors so
this will avoid repeated code.
Signed-off-by: Geoff Salmon <gsalmon@se-instruments.com>
There really is no such state, but there probably should have been one.
In any case, we do have one just to make the code simpler, but this should
not appear in the management responses. This patch fixes the issue by
covering over our tracks before sending a response.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Adds struct containing clock description info that will be needed for
USER_DESCRIPTION and CLOCK_DESCRIPTION management messages.
Signed-off-by: Geoff Salmon <gsalmon@se-instruments.com>
static_ptp_text is like a PTPText that includes space for the text
which makes it more convenient for ptp texts stored in the clock.
Signed-off-by: Geoff Salmon <gsalmon@se-instruments.com>
Add a new option to wait for ptp4l to be in a synchronized state.
Periodically check PORT_DATA_SET and wait until there is a port in
SLAVE, MASTER or GRAND_MASTER state. Also, set the default
synchronization offset according to the currentUtcOffset value from
TIME_PROPERTIES_DATA_SET and the direction of the clock synchronization.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
The printing facility is used by different programs, allow to set the
program name which prefixes the messages written to stdout.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
If the port resets itself after detecting a fault, then the polling events
for that port are no longer valid. This patch fixes a latent bug that
would appear if a fault and another event were to happen simultaneously.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
A timeout of 15 seconds is not always acceptable, make it configurable.
By popular consensus, instead of using a linear number of seconds, use
the 2^N format for the time interval, just like the other intervals in
the PTP data sets. In addition to numeric values, let the configuration
file support 'ASAP' to have the fault reset immediately.
[RC - moved the handling of special case tmo=0 and added a break out
of the fd event loop in case the fds have been closed.
- changed the linear seconds option to log second instead.
- changed the commit message to reflect the final version. ]
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Arm the fault-clearing timer only when an event causes a port to change state
to PS_FAULTY. Previously, if poll() returned because of an fd event other than
the fault-clearing timeout, the fault clearing timer would re-arm for
each port in PS_FAULTY state.
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
This patch implements the capable flag as follows.
1. After calculating the neighbor rate, we are capable.
2. If we miss too many responses, we are incapable.
3. If we get multiple responses, we throw a fault,
and so we are also incapable.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
This commit only provides helper functions that will implement the effect
of a port being not capable. We let the port be always 'capable' for now,
until we actually have added the details of that flag.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
We use the follow_up_info to control behavior that is specific to the
802.1AS standard. In several instances, that standard goes against the
1588 standard or requires new run time logic that exceeds what can be
reasonably described as a 1588 profile.
Since we will need a few more run time exceptions in order to support
802.1AS, we introduce a helper function to identify this case, rather
than hard coding a test for follow_up_info, in order to be more clear
about it.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Because of an oversight in the event code, a port will not send peer delay
request messages while in the initial listening state. This patch fixes
the issue by expanding this special, initial case.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
The function, tlv_post_recv, and the functions it calls don't check
the length of the tlv before flipping the byte order of fields. An
attacker (or a really buggy client) can craft a message causing the
byte order of data outside the received message to be flipped.
None of the supported tlvs are large enough to flip bytes outside the
ptp_message struct, which could corrupt the heap. However, it's easy
to mess up the message's refcnt field, leading to memory leaks.
The fix is to check that the tlv length is what is expected when
receiving, and tlv_post_recv needs to return an int to signal when a
tlv is invalid.
Signed-off-by: Geoff Salmon <gsalmon@se-instruments.com>
The PPS time stamps are always made by the system clock, don't allow
running the PPS loop with other clocks.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
In the PPS loop, instead of setting the system clock from the PHC only
once on start, read PHC with each PPS sample and use the time stamp to
get the whole number of seconds in the offset. This will prevent phc2sys
from losing track of the system clock.
Also, check if the PPS is synchronized to the PHC.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
With non-PPS loops let the servo make the inital correction. Move the
code to the PPS loop and change it to use the sample filtering to reduce
the error in the initial correction.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Instead of always starting at zero frequency offset, read the currently
stored value on start and pass it to the servo. As the read may silently
fail and return zero, set the clock frequency back to the read value to
make sure it's always equal to the actual frequency of the clock.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Similarly to the servo in phc2sys, when clock is stepped, set
immediately also its frequency. This significantly improves the initial
convergence with large frequency offsets.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Current date stored in nanoseconds doesn't fit in 64-bit double format.
Keep the offset and the time stamp in integer nanoseconds.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Miroslav Lichvar
Richard Cochran
Geoff Salmon
Delio Brignoli