Commit ea7a7882 removed the calls to transport_peer(), inadvertently
substituting them with transport_send(), resulting in PDelay messages
being sent with an incorrect destination address.
This patch fixes the issue by introducing peer_prepare_and_send(),
analogous to the port_prepare_and_send() function.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
timemaster is a program that uses ptp4l and phc2sys in combination with
chronyd or ntpd to synchronize the system clock to NTP and PTP time
sources. The PTP time is provided by phc2sys and ptp4l via SHM reference
clocks to chronyd/ntpd, which can compare all time sources and use the
best sources to synchronize the system clock.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
For the ports to be truly created and removed dynamically, the last used
port number has to be remembered by the clock and used for port creation.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
There's no need to regenerate pollfd multiple times during batches of port
operations (like creating of the clock). Just be lazy and regenerate it only
once it's needed.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Remove the limit of MAX_PORTS ports (default 8) and keep the ports in
a linked list. This allows ptp4l to be used on large machines and in the
future, it will allow dynamic adding and removing of ports while ptp4l is
running.
For this to work, pollfd needs to be dynamically allocated. Changed pollfd
handling from clock_install_fda/clock_remove_fda to notification
(clock_fda_changed), where the clock will rebuild pollfd by querying all its
ports.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
The uds port is handled specially in almost all cases, it doesn't behave
like the rest of ports in the port array. Make it a standalone member of
struct clock.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
The fault timer file descriptor is a per port item, put it inside struct
port where other per port file descriptors are kept.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Copy the address directly to struct sockaddr_in or sockaddr_in6 instead
of sockaddr as Coverity doesn't seem to understand the union and reports
a buffer overflow.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Instead of setting it to the PTP domain number, add a new option to
ptp4l and phc2sys to set it as needed. The default value is 0. This
allows multiple ptp4l/phc2sys instances running in the same domain.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
In pmc and phc2sys handle terminating signals and close the UDS
transport before exit to remove the sockets in /var/run.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
This is an updated version of a script I wrote a couple years ago for
debugging the PHC when writing a new driver. I figured that it might be
handy for the LinuxPTP project to include, as it can give some insight
into the PHC directly. I have updated it to make use of the shared code
here, in order to reduce duplication. Hopefully this is of some use to
everyone.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Always disable the clock sanity check when the ntpshm servo is used,
because it doesn't know when or how is the clock adjusted. Disable also
the kernel leap option as the process controlling the clock is
responsible for setting the kernel flag.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
When leap second is inserted/deleted to the reference time, adjust the
reference point as if the clock was stepped in the opposite direction to
keep the slope and error statistics valid and correct the offset
gracefully.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Introduce a new function to inform the servo about upcoming leap second.
This is used when the kernel leap is disabled to allow the servo to
handle better the sudden 1 second step in the offset when the leap
second is inserted or deleted.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
After moving the leap second check away from update_pmc(), the time
stamp is used only to control the pmc update interval. Switch to
CLOCK_MONOTONIC to keep the interval stable when CLOCK_REALTIME is
stepped.
When synchronizing the system clock and the PTP UTC offset is valid and
traceable, set the TAI offset of the clock to have correct CLOCK_TAI
(which is implemented in the kernel as CLOCK_REALTIME + TAI offset).
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
This simplifies passing of pending leap seconds to the clocks and it
will also allow to apply leap second to other clocks than system clock
if needed in future.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
This is a simple servo that provides the NTP SHM reference clock. It
doesn't make any clock adjustments and it always returns with the
unlocked state. It writes all samples to the SHM segment and another
process (e.g. chronyd or ntpd) is needed to read the samples and
actually synchronize the clock. The SHM segment number is set to the PTP
domain number to allow multiple SHM reference clocks running at the same
time.
This is mainly useful when other time sources are available on the
system (e.g. NTP, hardware reference clocks, or other PTP domains)
and a fallback to/from PTP is needed.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
When grandmaster does not use PTP timescale but the previous one did, we
need to reset sync offset and leap flag.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
By default, do not synchronize CLOCK_REALTIME. To do it, -r option is
needed. That will only consider CLOCK_REALTIME as the destination. To
consider it also as a possible time source, use -rr.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Recognize errors returned in MANAGEMENT_ERROR_STATUS TLV and return
a distinct value from run_pmc in case such error is received.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Add support for subscribing to events (run_pmc_subscribe) and receiving and
handling of received events (run_pmc_events).
Add initial support for port status changes.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Implement pmc_target_port to set a port number, leaving clock identity
unchanged, and pmc_target_all to set clock identity and port number to all
1's.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Do not call clock_open to open a clock device but let clock_add do that and
return the newly created struct. Also, store the device (interface) name in
struct clock.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
This just moves code around to have related functions together and forward
declaration at the beginning of the file. No code changes.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
For now, only CLOCK_REALTIME can be UTC. This may stay this way forever but
now we have a clean separation between codepaths where CLOCK_REALTIME is
required and codepaths any UTC clock should take.
The main motiviation behind this change is removal of sync_offset_direction.
It has to be computed on the fly based on the source and destination when we
have multiple clocks supported and automatic following of ptp4l state
changes implemented.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Split members that apply to all synchronized clocks and members that apply
to an individual clock. Keep all clocks in a list, with a pointer to the
source clock. This will allow to support multiple clocks synchronization.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Split the generic (global) part of update_sync_offset and the part that
affects individual clocks. This is in preparation for phc2sys handling
synchronization of more clocks.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Make run_pmc usable for any kind of management message. Create wrappers for
waiting for ptp4l and for getting UTC offset.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
The sanity_freq_limit field was erroneously added to the config struct
in ed379b40, the right one is in the default_ds struct.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Miroslav Lichvar
Richard Cochran
Jiri Benc
Jacob Keller