Do not call clock_open to open a clock device but let clock_add do that and
return the newly created struct. Also, store the device (interface) name in
struct clock.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
This just moves code around to have related functions together and forward
declaration at the beginning of the file. No code changes.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
For now, only CLOCK_REALTIME can be UTC. This may stay this way forever but
now we have a clean separation between codepaths where CLOCK_REALTIME is
required and codepaths any UTC clock should take.
The main motiviation behind this change is removal of sync_offset_direction.
It has to be computed on the fly based on the source and destination when we
have multiple clocks supported and automatic following of ptp4l state
changes implemented.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Split members that apply to all synchronized clocks and members that apply
to an individual clock. Keep all clocks in a list, with a pointer to the
source clock. This will allow to support multiple clocks synchronization.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Split the generic (global) part of update_sync_offset and the part that
affects individual clocks. This is in preparation for phc2sys handling
synchronization of more clocks.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Make run_pmc usable for any kind of management message. Create wrappers for
waiting for ptp4l and for getting UTC offset.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
The sanity_freq_limit field was erroneously added to the config struct
in ed379b40, the right one is in the default_ds struct.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
This patch modifies the hwtstamp_ctl program, so that it will (attempt
to) use the SIOCGHWTSTAMP ioctl to non-destructively read the current
hardware timestamping policy, prior to setting it with SIOCSHWTSTAMP.
This change has 3 primary advantages:
1) It allows reading the current settings of the device, which was
previously not possible since SIOCSHWTSTAMP is destructive.
2) The default behavior without rx-filter or tx-type selected on the
command line is no longer destructive, since it does not attempt to
set the values to 0. The user must explicitly request to disable the
settings, by using the provided options.
3) It allows only modifying tx-type or rx-filter separately, without
destroying the other setting.
This patch supersedes a previous submission which added a -g flag. This
new method of getting first is more advantageous and doesn't require
adding an additional option flag.
- v4
* only display results if command succeeds, as the contents are otherwise
expected to be identical to what we passed in.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
In order to allow hwtstamp_ctl to use the non-destructive SIOCGHWTSTAMP
ioctl, we need to add it to missing.h, in order to prevent build failure
on older kernels which don't have this support.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
This was broken in commit e804e6, ifa_addr is a pointer to sockaddr,
it shouldn't be referenced for the memcpy call.
Acked-by: Jiri Benc <jbenc@redhat.com>
Split management message creation to more fine-grained functions to allow
notification messages to be created.
The new clock_management_fill_response is called from
clock_management_get_response (so the function behaves exactly the same as
before this patch) and from a new clock_notify_event function. The
difference is clock_management_get_response uses the request message to
construct the reply message, while clock_notify_event constructs the reply
message based on the notification id.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Split management message creation to more fine-grained functions to allow
notification messages to be created.
The new port_management_fill_response is called from
port_management_get_response (so the function behaves exactly the same
as before this patch) and from a new port_notify_event function. The
difference is port_management_get_response uses the request message to
construct the reply message, while port_notify_event constructs the
reply message based on the notification id.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Add expiration time to subscriptions; they need to be renewed before they
expiry. This way, the subscription automatically times out when phc2sys is
killed.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
This puts groundwork for event subscription and notification. The individual
events are added by subsequent patches.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
When phc2sys is started before ptp4l or it is interrupted before ptp4l has
a chance to reply to its query, the "uds: sendto failed: Connection refused"
message is output. This is not an interesting message.
Also, don't output the "failed to send message" error from pmc_send, as
all transports output errors in their send routine.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
This modifies all transports to use a new common address type, struct
address. This address is stored in a ptp_message for all received messages.
For sending, the "default" address is used with the default sending
functions, transport_send and transport_peer. The default address depends on
the transport; it's supposed to be the multicast address assigned by the
transport specification.
Later, a new transport_sendto function will be implemented that sends to the
address contained in the passed ptp_message.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
The callers of those functions are all using ptp_message. As we're going to
return more information (the address), let those functions just fill in the
ptp_message fields directly.
Some minor reshuffling needed to prevent circular header dependencies.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
In order to be able to convert to a generic address struct, separate source
and destination address into separate fields.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
When less bytes than the header size is read, do not indicate to the caller
that the read was successful, as the caller would read uninitialized memory.
To achieve that, subtract the header size unconditionally (unless an error
was returned by sk_receive).
In addition, do not check for Ethernet type when full Ethernet header was
not read. This again may lead to reading of uninitialized memory.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
The task of preparing the message for transmission and sending it appears
at many places. Unify them into a new function.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Currently, it is assumed that the management TLV data of management COMMAND
messages is always empty. This is not true for the INITIALIZE command and
also for a custom command we'll be introducing.
Move the check to msg_post_recv and let it check only the TLVs defined by
the standard.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Most PHC drivers implement stepping (ADJ_SETOFFSET) by reading the
clock, adjusting the value by the offset and writing it back. This is
not perfectly accurate and if the operation is slow (e.g. due to PCIe
latencies), the error can be in microseconds.
Increase the default first step threshold from 100 nanoseconds to 20
microseconds to step only when the initial offset is larger than
the error in the step.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
With the new linreg servo the frequency offset and time offset are
controlled separately. The ratio between master's frequency and the
current frequency of the local clock is known and can be used when
calculating delay or peer delay to improve their accuracy.
This greatly improves the stability of the delay when the servo is
correcting a large offset.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
This servo uses linear regression to estimate current time and
frequency error. The number of points used in the regression is
variable (from 4 to 64 in powers of 2) and is selected by a long-term
statistic of the prediction error.
Future improvements could include tracking of sudden frequency changes
(e.g. due to temperature variations), better stability of the error
statistic when a large offset is corrected, options to set the speed of
the adaptation, minimum and maximum number of points, or an option to
prefer frequency accuracy over time accuracy.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
These settings will be useful for all implemented servos, so move them
to the common servo code to avoid duplication. The configuration options
are renamed, but the they can be still set by their old names.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
The initial check if the clock should be stepped always passed after the
servo was reset (e.g. from clock sanity check). Fix the condition to
step only when the threshold is exceeded.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Setting GRANDMASTER_SETTINGS_NP is allowed only from UDS, but
PORT_DATA_SET can be set from any port. Move the port check to
clock_manage(), so all clock and port SET actions are restricted
to the UDS port.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
This fixes cumulativeScaledRateOffset reported in TIME_STATUS_NP before
the rate ratio is updated from port.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
When peer delay is < min_neighbor_prop_delay the port is flagged
as non 802.1AS capable. min_neighbor_prop_delay defaults to -20ms.
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
Previouly the peer delay was not taking into account the
frequency offset between the local clock and the peer's clock.
Reset neighborRateRatio to 1.0 in port_nrate_initialize().
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
Commit e425da2f inadvertently enabled the announce timer on the UDS port,
causing it to continually reopen the socket when in slave mode. This patch
fixes the issue by passing zero in the 'span' field of the new function,
set_tmo_random, which disables the timer again.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reported-by: Rohrer Hansjoerg <hj.rohrer@mobatime.com>
Jiri Benc
Miroslav Lichvar
Richard Cochran
Jacob Keller
Delio Brignoli
Stephan Gatzka