Increase default first step threshold to 20 us.
Most PHC drivers implement stepping (ADJ_SETOFFSET) by reading the clock, adjusting the value by the offset and writing it back. This is not perfectly accurate and if the operation is slow (e.g. due to PCIe latencies), the error can be in microseconds. Increase the default first step threshold from 100 nanoseconds to 20 microseconds to step only when the initial offset is larger than the error in the step. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>master
parent
61de819d56
commit
2b099cfa06
|
@ -49,7 +49,7 @@ pi_integral_scale 0.0
|
|||
pi_integral_exponent 0.4
|
||||
pi_integral_norm_max 0.3
|
||||
step_threshold 0.0
|
||||
first_step_threshold 0.0000001
|
||||
first_step_threshold 0.00002
|
||||
max_frequency 900000000
|
||||
clock_servo pi
|
||||
sanity_freq_limit 200000000
|
||||
|
|
2
gPTP.cfg
2
gPTP.cfg
|
@ -49,7 +49,7 @@ pi_integral_scale 0.0
|
|||
pi_integral_exponent 0.4
|
||||
pi_integral_norm_max 0.3
|
||||
step_threshold 0.0
|
||||
first_step_threshold 0.0000001
|
||||
first_step_threshold 0.00002
|
||||
max_frequency 900000000
|
||||
clock_servo pi
|
||||
sanity_freq_limit 200000000
|
||||
|
|
|
@ -106,7 +106,7 @@ Specify the integral constant of the PI controller. The default is 0.3.
|
|||
Specify the step threshold of the servo. It is the maximum offset that
|
||||
the servo corrects by changing the clock frequency instead of stepping the
|
||||
clock. The clock is stepped on start regardless of the option if the offset is
|
||||
larger than 100 nanoseconds (unless the
|
||||
larger than 20 microseconds (unless the
|
||||
.BI \-F
|
||||
option is used). It's specified in seconds. The value of 0.0 disables stepping
|
||||
after the start. The default is 0.0.
|
||||
|
@ -115,7 +115,7 @@ after the start. The default is 0.0.
|
|||
Specify the step threshold applied only on the first update. It is the maximum
|
||||
offset that is corrected by adjusting clock. It's specified in seconds. The
|
||||
value of 0.0 disables stepping on start.
|
||||
The default is 0.0000001 (100 nanoseconds).
|
||||
The default is 0.00002 (20 microseconds).
|
||||
.TP
|
||||
.BI \-R " update-rate"
|
||||
Specify the slave clock update rate when running in the direct synchronization
|
||||
|
|
|
@ -565,7 +565,7 @@ static void usage(char *progname)
|
|||
" -P [kp] proportional constant (0.7)\n"
|
||||
" -I [ki] integration constant (0.3)\n"
|
||||
" -S [step] step threshold (disabled)\n"
|
||||
" -F [step] step threshold only on start (0.0000001)\n"
|
||||
" -F [step] step threshold only on start (0.00002)\n"
|
||||
" -R [rate] slave clock update rate in HZ (1.0)\n"
|
||||
" -N [num] number of master clock readings per update (5)\n"
|
||||
" -O [offset] slave-master time offset (0)\n"
|
||||
|
|
2
ptp4l.8
2
ptp4l.8
|
@ -355,7 +355,7 @@ The maximum offset the servo will correct by changing the clock
|
|||
frequency instead of stepping the clock. This is only applied on the first
|
||||
update. It's specified in seconds. When set to 0.0, the servo won't step
|
||||
the clock on start.
|
||||
The default is 0.0000001 (100 nanoseconds).
|
||||
The default is 0.00002 (20 microseconds).
|
||||
This option used to be called (and can still be set by)
|
||||
.BR pi_f_offset_const .
|
||||
.TP
|
||||
|
|
2
servo.c
2
servo.c
|
@ -25,7 +25,7 @@
|
|||
#define NSEC_PER_SEC 1000000000
|
||||
|
||||
double servo_step_threshold = 0.0;
|
||||
double servo_first_step_threshold = 0.0000001; /* 100 nanoseconds */
|
||||
double servo_first_step_threshold = 0.00002; /* 20 microseconds */
|
||||
int servo_max_frequency = 900000000;
|
||||
|
||||
struct servo *servo_create(enum servo_type type, int fadj, int max_ppb, int sw_ts)
|
||||
|
|
Loading…
Reference in New Issue