Some PTP Hardware Clocks have input pins that can generate time stamps
on the edges of external signals. This functionality can be used in
various ways. For example, one can synchronize a PHC device to a
global time source by taking a Pulse Per Second signal from the source
into the PHC. This patch adds support for synchronizing one or more
PHC slaves to a given master clock.
The implementation follows a modular design that allows adding
different kinds of master clocks in the future. This patch starts off
with a single "generic" PPS master, meaning a PPS signal that lacks
and time or date information. The generic master assumes that the
Linux system time is approximately correct (by NTP or RTC for example)
in order to calculate the time of the incoming PPS edges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Balint Ferencz <fernya@gmail.com>
ptp4l -f default.cfg complains:
unknown option inhibit_pdelay_req at line 41 in global section
failed to parse configuration file /etc/linuxptp/default.cfg
Fixes: 450b1ed844 ("port: Add inhibit_delay_req.")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Users may need to use different socket priorities for ptp4l traffic for
the purpose of traffic shaping. An example is to route ptp4l traffic
through a specific Linux egress queue using the mqprio qdisc.
- Update raw.c open_socket() to accept a socket_priority parameter
- Add the socket_priority option to config.c and the default.cfg config
file. The option defaults to 0.
CC: "Ong, Boon Leong" <boon.leong.ong@intel.com>
CC: "Wong, Vincent Por Yin" <vincent.por.yin.wong@intel.com>
Signed-off-by: Khor, Isaac Shi Yan <isaac.shi.yan.khor@intel.com>
Set the announce, sync and delay request intervals in the example
configs per the G.8275.1 and G.8275.2 recommendations. Enable the L2
transport in G.8275.1.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Add provision to disable delay requests. Designated masters who do not
need to calculate pdelay can use this option. This is required by
Automotive Profile to reduce network load.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
This commit adds functionality to increase the sync and pdelay request
intervals once gptp synchronization has been achieved. This is useful
while running Automotive Profile where the network is usually static.
Here, we are assuming that the gPTP synchronization is achieved whenever
the last 'n' offsets calculated using the Sync messages are below a
certain threshold. Both, the number of offsets to consider and the offset
threshold are configurable.
In order to support the interval update, a new clock servo state
CLOCK_SERVO_STABLE has been added. The clock will transition to this
state whenever the above condition is satisfied. When this transition
occurs, the slave will send an "interval request" signaling message
asking the master to change the sync interval. It will also update the
pdelay request interval locally.
Four new config options have been added to provide this functionality:
- servo_offset_threshold: All the offset values being considered should
be below this value.
- servo_num_offset_values: number of previously received offset values
to consider.
- operLogSyncInterval: slave will ask the master to switch to this
interval for sending sync messages when the offset stabilizes.
- operLogPdelayReqInterval: the slave will set this interval for pdelay
request messages when the offset stabilizes.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
This commit adds example for configuring master and slave devices that
support features from the Automotive Profile.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
This config option will skip the source port identity verification in
the Sync and Follow_up messages. This option is needed when the announce
messages are disabled because the slave cannot know the identity of
master without announce messages.
This is required by Automotive Profile as part of skipping the Best
Master Clock Algorithm (BMCA).
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
This option will accomplish 2 things. On the master, it will stop the
announce messages being sent (by disabling FD_MANNO_TIMER timer). On
slave, it will not configure announce message timeouts (by disabling
FD_ANNOUNCE_TIMEOUT timer).
This config option is needed for the Automotive profile as part of
skipping the Best Master Clock Algorithm (BMCA).
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
This adds config option to specify static roles for master and slave
in the Best Master Clock Algorithm. This is the case for Automotive
Profile where networks are mostly static and role for each device is
known in advance.
masterOnly and slaveOnly will be used to determine the roles for the
devices. Since masterOnly is a per-port config and slaveOnly is a global
config option, role assignment will be slightly odd in case of bridges.
If slaveOnly is set to 1, all the ports will be in slave roles except
for the ones where masterOnly is set to 1. These ports will assume the
master role.
Two new FSMs which will be used for master and slave roles for this
config option have also been added.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
If set to 'true', this unconditionally sets the asCapable variable. The
usual checks will be applied to asCapable if it is set to 'auto'. The
default value is 'auto'.
This config option is needed by the Automotive Profile. The master will
be able to send out Sync Message as soon as the daemon is started.
Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Add attribute maxStepsRemoved which is included in IEEE1588-2017 (v2.1)
It is an optional attribute which can decide if an Announce message is
considered in the operation of the BMCA or not.
Signed-off-by: Anders Selhammer <anders.selhammer@est.tech>
The sub agent use net-snmp library and AgentX protocol for the
communication towards the snmp master agent.
snmpd.c should only include general setup needed for handling snmp.
Supported MIBs should be implemented in separate files.
Makefile will include snmpd if libsnmp is available during compilation.
configs/snmpd.conf should be placed in /etc/snmp/
Signed-off-by: Anders Selhammer <anders.selhammer@est.tech>
The default initial value for logAnnounceInterval should be 0 (once per second).
See chapter 10.6.2.2 of IEEE 802.1AS standard.
Signed-off-by: Christoph Seifert <christoph.seifert@posteo.me>
This patch adds configuration file support for a table of unicast
masters. Each table lives in its own section and has a unique,
positive numerical ID. Entries in the table are a pair of transport
type and protocol address.
Each port may specify a table id to be used for unicast negotiation.
Tables may not be shared between ports, but nothing prevents table
entries from appearing in more than table.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Richard Cochran
Vladimir Oltean
Khor, Isaac Shi Yan
Miroslav Lichvar
Vedang Patel
Anders Selhammer
Christoph Seifert