Instead of killing the whole process group, which may contain other
processes than timemaster and its children (e.g. when it is started from
a shell script), save the PIDs and kill the processes individually.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Add weight parameter to the sample function. Samples with smaller weight
are less reliable, they can be ignored by the servo or the adjustments
of the clock can be smaller.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Add new time stamp processing modes to return raw delay and offset based
on the raw delay instead of the long-term filtered delay, and to return
also a weight of the sample. The weight is set to the ratio between the
two delays. This gives smaller weight to samples where the sync and/or
delay messages were delayed significantly in the network and possibly
include a large error.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Introduce a time stamp processor for offset/delay calculations and use
it in the clock and port modules.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Convert time stamps to tmv_t and apply all corrections before passing
them to clock/port functions to reduce the number of parameters.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
When no source is found in the automatic mode and a clock is selected as
the default source, set its state temporarily to slave to prevent the
clock from being synchronized to itself and drifting quickly away.
Also, don't use this mode with only one PTP clock and don't include the
system clock.
This fixes phc2sys with SHM servo (e.g. used by timemaster).
In ntp-4.2.8p1 the segment access was made configurable with the
refclock mode option. Set the mode to 1 to create all SHM segments
with owner-only access.
If we have clocks to synchronize but no source, just pick the last one in
the list, which is the first one from the ptp4l command line.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
When running a "jbod" Boundary Clock, as long as we have one slaved port,
we always want the clocks on the other ports to be synchronized, regardless
of their port state.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
If the user has configured the appropriate option, then simply warn
about the clock device mismatch, and then go on in "JBOD" mode.
Whenever the port enters the uncalibrated state, it tells the clock
to switch to the new PHC device.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
When switching clock devices in JBOD mode, we need to be able to reset the
servo. The existing servo_reset() function will not serve us well, because
in this case we also need to seed the existing frequency offset and limit.
This patch adds a new method that simply starts the servo from scratch.
In the unlikely event of a resource allocation failure, the method will
simply continue to use the previous device, which is better than nothing
and certainly preferable to bailing out the program.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
This patch adds a configuration option that allows running a boundary clock
using "just a bunch of devices". Normally each port is probed to make sure
they all share the same PTP hardware clock, but this option will allow a
heterogeneous collection of devices, should the user really want it.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
The stats for the maximum size were not reset, which caused the
the servo to reuse old data instead of returning with unlocked
state.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
The reconfigure function is missing a check whether state for the given
clock actually changed or not. This caused state for all unchanged ports to
be zeroed.
Reported-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
The current implementation fetches a transmit time stamp by polling on the
socket with pollfd.events set to zero, and then checking if POLLERR has
been returned by the kernel in pollfd.revents. This has the unfortunate
side effect of sleeping in poll() for the entire time out duration,
regardless of when the error queue becomes readable.
Linux kernel version 3.10 introduced a new socket option that allows
polling for transmit time stamps explicitly, waking the process as soon as
a time stamp becomes available. This patch enables the socket option,
falling back to the old behavior if necessary.
Suggested-by: Joe Schaack <jschaack@xes-inc.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
When adding a new port, put it at the end of the list instead of head.
This restores the order of received management messages as was before
commit 08575133.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Commit ea7a7882 removed the calls to transport_peer(), inadvertently
substituting them with transport_send(), resulting in PDelay messages
being sent with an incorrect destination address.
This patch fixes the issue by introducing peer_prepare_and_send(),
analogous to the port_prepare_and_send() function.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
timemaster is a program that uses ptp4l and phc2sys in combination with
chronyd or ntpd to synchronize the system clock to NTP and PTP time
sources. The PTP time is provided by phc2sys and ptp4l via SHM reference
clocks to chronyd/ntpd, which can compare all time sources and use the
best sources to synchronize the system clock.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
For the ports to be truly created and removed dynamically, the last used
port number has to be remembered by the clock and used for port creation.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
There's no need to regenerate pollfd multiple times during batches of port
operations (like creating of the clock). Just be lazy and regenerate it only
once it's needed.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Remove the limit of MAX_PORTS ports (default 8) and keep the ports in
a linked list. This allows ptp4l to be used on large machines and in the
future, it will allow dynamic adding and removing of ports while ptp4l is
running.
For this to work, pollfd needs to be dynamically allocated. Changed pollfd
handling from clock_install_fda/clock_remove_fda to notification
(clock_fda_changed), where the clock will rebuild pollfd by querying all its
ports.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
The uds port is handled specially in almost all cases, it doesn't behave
like the rest of ports in the port array. Make it a standalone member of
struct clock.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
The fault timer file descriptor is a per port item, put it inside struct
port where other per port file descriptors are kept.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Copy the address directly to struct sockaddr_in or sockaddr_in6 instead
of sockaddr as Coverity doesn't seem to understand the union and reports
a buffer overflow.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Instead of setting it to the PTP domain number, add a new option to
ptp4l and phc2sys to set it as needed. The default value is 0. This
allows multiple ptp4l/phc2sys instances running in the same domain.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
In pmc and phc2sys handle terminating signals and close the UDS
transport before exit to remove the sockets in /var/run.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
IOhannes m zmölnig
Miroslav Lichvar
Richard Cochran
Jiri Benc