chao
/
linuxptp
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linuxptp/default.cfg

93 lines
1.6 KiB
INI
Raw Normal View History

ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-08-21 07:03:31 +08:00
[global]
Add code to read a configuration file. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2011-12-31 16:14:18 +08:00
#
# Default Data Set
#
twoStepFlag 1
slaveOnly 0
priority1 128
priority2 128
domainNumber 0
ptp4l: Make UTC offset configurable. Currently UTC offset is defined as a constant - CURRENT_UTC_OFFSET, and if a leap second is added, that constant is no longer valid. Ptp4l was updated to read the UTC offset from configuration instead. Signed-off-by: Viliam Lejcik <viliam.lejcik@kistler.com>
2017-01-18 01:25:26 +08:00
#utc_offset 37
Add code to read a configuration file. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2011-12-31 16:14:18 +08:00
clockClass 248
clockAccuracy 0xFE
offsetScaledLogVariance 0xFFFF
Add an option to configure a free running local clock. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-08-21 22:41:36 +08:00
free_running 0
Add an option to dial the frequency estimation interval. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-08-21 23:14:15 +08:00
freq_est_interval 1
Introduce options to set DSCP values in PTP messages. In the last years there are several media streaming standards evolving that are relying on PTP. These standards make requirements about the DSCP priority of PTP messages. This patch introduces two new configuration options 'dscp_event' and 'dscp_general' to address that issue and to be able to set the DSCP priority separately for PTP event messages and PTP general messages. Signed-off-by: Henry Jesuiter <henry.jesuiter@alcnetworx.de> Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2016-07-12 19:52:48 +08:00
dscp_event 0
dscp_general 0
telecom: Add a configuration option for G.8275.defaultDS.localPriority. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2017-02-15 02:55:51 +08:00
G.8275.defaultDS.localPriority 128
Add code to read a configuration file. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2011-12-31 16:14:18 +08:00
#
# Port Data Set
#
logAnnounceInterval 1
logSyncInterval 0
logMinDelayReqInterval 0
Replace hard coded logMinPdelayReqInterval with configuration option. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-07-28 04:04:00 +08:00
logMinPdelayReqInterval 0
Add code to read a configuration file. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2011-12-31 16:14:18 +08:00
announceReceiptTimeout 3
Add a configuration file option for the sync receive timeout. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2013-08-26 20:36:49 +08:00
syncReceiptTimeout 0
Add asymmetry correction. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
2012-12-10 21:39:08 +08:00
delayAsymmetry 0
Make the fault reset interval a per-port configuration parameter. A timeout of 15 seconds is not always acceptable, make it configurable. By popular consensus, instead of using a linear number of seconds, use the 2^N format for the time interval, just like the other intervals in the PTP data sets. In addition to numeric values, let the configuration file support 'ASAP' to have the fault reset immediately. [RC - moved the handling of special case tmo=0 and added a break out of the fd event loop in case the fds have been closed. - changed the linear seconds option to log second instead. - changed the commit message to reflect the final version. ] Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2013-01-30 23:28:54 +08:00
fault_reset_interval 4
Implement neighborPropDelayThresh check in port_capable() Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
2013-03-14 03:16:59 +08:00
neighborPropDelayThresh 20000000
telecom: Add a configuration option for G.8275.portDS.localPriority. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2017-02-15 03:03:15 +08:00
G.8275.portDS.localPriority 128
Make the number of transmit time stamp retries configurable. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-03-21 03:16:58 +08:00
#
# Run time options
#
Explicitly set default values for all configurable options. Make it easier to find out the compiled-in defaults in the code and set all options in default.cfg. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2012-10-18 19:15:06 +08:00
assume_two_step 0
ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-08-21 07:03:31 +08:00
logging_level 6
Add a configuration option to control the path trace mechanism. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-08-07 15:16:19 +08:00
path_trace_enabled 0
Add a configuration option to control the follow up info TLV. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-08-09 02:16:47 +08:00
follow_up_info 0
Support hybrid E2E using unicast delay requests and responses. The draft Enterprise Profile [1] specifies a hybrid E2E delay mechanism, where the delay response message is sent "in kind". That is, if the request is unicast, then the response is also unicast. Apparently this scheme is already in widespread use in some industries. Also, it makes sense, because those messages are of no interest to the other slaves in the PTP network. Because of the address work already in place, in turns out that adding this mode is almost trivial. This patch introduces an "hybrid_e2e" option that enabled the new mode. 1. https://datatracker.ietf.org/doc/draft-ietf-tictoc-ptp-enterprise-profile Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2015-08-29 02:41:50 +08:00
hybrid_e2e 0
Add a configuration file option to enable the NetSync Monitor protocol. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2017-11-26 10:26:52 +08:00
net_sync_monitor 0
ptp4l: Use poll() instead of a try-again loop This patch modifies sk_receive in order to use poll() on POLLERR instead of the tryagain loop as this resolves issues with drivers who do not return timestamps quickly enough. It also resolves the issue of wasting time repeating every microsecond. It lets the kernel sleep our application until the data or timeout arrives. This change also replaces the old tx_timestamp_retries config value with tx_timestamp_timeout specified in milliseconds (the smallest length of time poll accepts). This does have the side effect of increasing the minimum delay before missing a timestamp by up to 1ms, but the poll should return sooner in the normal case where a packet timestamp was not dropped. This change vastly improves some devices and cleans the code up by simplifying a race condition window due to drivers returning tx timestamp on the error queue. [ RC - removed the unused 'try_again' variable. ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
2013-04-05 23:52:14 +08:00
tx_timestamp_timeout 1
ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-08-21 07:03:31 +08:00
use_syslog 1
verbose 0
Add summary statistics. Add new options to ptp4l and phc2sys to print summary statistics of the clock instead of the individual samples. [ RC - Fix () function prototype with (void). - Use unsigned for sample counter. - Fix over-zealous line breaks. ] Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2013-02-08 02:56:53 +08:00
summary_interval 0
Add options to not apply leap seconds in kernel. Add kernel_leap option for ptp4l and -x option for phc2sys to disable setting of the STA_INS/STA_DEL bit to slowly correct the one-second offset by servo. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2013-03-08 00:27:33 +08:00
kernel_leap 1
Add a configuration file option for the extra sync-fup check. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2013-08-29 17:01:27 +08:00
check_fup_sync 0
ptp4l: update the configuration files this patch updates the default.cfg and gPTP.cfg to show the new defaults Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
2012-09-29 02:46:05 +08:00
#
# Servo Options
#
Make the PI constants configurable. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-05-03 17:17:34 +08:00
pi_proportional_const 0.0
pi_integral_const 0.0
Adjust constants of PI servo according to sync interval. Instead of using fixed constants, set them by the following formula from the current sync to allow good performance of the servo even when the sync interval changes in runtime and to avoid instability. kp = min(kp_scale * sync^kp_exponent, kp_norm_max / sync) ki = min(ki_scale * sync^ki_exponent, ki_norm_max / sync) The scale, exponent and norm_max constants are configurable. The defaults are chosen so there is no change to the previous default constants of the servo with one second sync interval. The automatic adjustment can be disabled by setting the pi_proportional_const and pi_integral_const options to a non-zero value, but stability of the servo is always enforced. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2013-06-28 23:09:14 +08:00
pi_proportional_scale 0.0
pi_proportional_exponent -0.3
pi_proportional_norm_max 0.7
pi_integral_scale 0.0
pi_integral_exponent 0.4
pi_integral_norm_max 0.3
Move PI step threshold and max frequency settings to common servo code. These settings will be useful for all implemented servos, so move them to the common servo code to avoid duplication. The configuration options are renamed, but the they can be still set by their old names. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2014-03-14 01:34:17 +08:00
step_threshold 0.0
Increase default first step threshold to 20 us. Most PHC drivers implement stepping (ADJ_SETOFFSET) by reading the clock, adjusting the value by the offset and writing it back. This is not perfectly accurate and if the operation is slow (e.g. due to PCIe latencies), the error can be in microseconds. Increase the default first step threshold from 100 nanoseconds to 20 microseconds to step only when the initial offset is larger than the error in the step. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2014-03-19 01:25:13 +08:00
first_step_threshold 0.00002
Move PI step threshold and max frequency settings to common servo code. These settings will be useful for all implemented servos, so move them to the common servo code to avoid duplication. The configuration options are renamed, but the they can be still set by their old names. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2014-03-14 01:34:17 +08:00
max_frequency 900000000
Replace spaces with tabs in configs. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2013-04-11 02:07:49 +08:00
clock_servo pi
Add clock sanity check. Check the sanity of the synchronized clock by comparing its uncorrected frequency with the system monotonic clock. When the measured frequency offset is larger than the value of the sanity_freq_limit option (20% by default), a warning message will be printed and the servo will be reset. Setting the option to zero disables the check. This is useful to detect when the clock is broken or adjusted by another program. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2013-10-23 00:57:15 +08:00
sanity_freq_limit 200000000
Add option to set NTP SHM segment number. Instead of setting it to the PTP domain number, add a new option to ptp4l and phc2sys to set it as needed. The default value is 0. This allows multiple ptp4l/phc2sys instances running in the same domain. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2014-07-09 22:25:08 +08:00
ntpshm_segment 0
Add a configuration option to specify the L2 MAC addresses. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-07-27 17:30:22 +08:00
#
# Transport options
#
transportSpecific 0x0
ptp_dst_mac 01:1B:19:00:00:00
p2p_dst_mac 01:80:C2:00:00:0E
udp6: set hop limit with udp_ttl option. Use the udp_ttl option to configure both IPv4 and IPv6 transports. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2015-08-31 20:02:46 +08:00
udp_ttl 1
udp6: add an option to set the multicast scope. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-11-26 03:30:14 +08:00
udp6_scope 0x0E
Introduce a configuration file option for the server's UDS address. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2013-09-30 02:57:00 +08:00
uds_address /var/run/ptp4l
ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2012-08-21 07:03:31 +08:00
#
# Default interface options
#
network_transport UDPv4
delay_mechanism E2E
time_stamping hardware
tsproc: add raw and weighting modes. Add new time stamp processing modes to return raw delay and offset based on the raw delay instead of the long-term filtered delay, and to return also a weight of the sample. The weight is set to the ratio between the two delays. This gives smaller weight to samples where the sync and/or delay messages were delayed significantly in the network and possibly include a large error. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2015-03-26 23:32:14 +08:00
tsproc_mode filter
Add options to configure delay filter. Add new options delay_filter and delay_filter_length to select the filter and its length. They set both the clock delay filter and the port peer delay filter. The default is now moving median with 10 samples. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2013-10-29 18:58:20 +08:00
delay_filter moving_median
delay_filter_length 10
config: Introduce options for correcting transmit and receive delays. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2014-12-07 05:14:28 +08:00
egressLatency 0
ingressLatency 0
config: add a option to enable a poor man's boundary clock. This patch adds a configuration option that allows running a boundary clock using "just a bunch of devices". Normally each port is probed to make sure they all share the same PTP hardware clock, but this option will allow a heterogeneous collection of devices, should the user really want it. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jiri Benc <jbenc@redhat.com>
2014-11-02 01:59:13 +08:00
boundary_clock_jbod 0
config clock description Signed-off-by: Geoff Salmon <gsalmon@se-instruments.com>
2013-02-04 06:01:52 +08:00
#
# Clock description
#
Replace spaces with tabs in configs. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
2013-04-11 02:07:49 +08:00
productDescription ;;
revisionData ;;
manufacturerIdentity 00:00:00
Add missing option to the default configuration file. While the userDescription field is implemented in the code, the same option is not present in the sample configuration file. This patch fixes the issue by adding the option with an empty default value. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reported-by: Rohrer Hansjoerg <hj.rohrer@mobatime.com>
2013-07-04 13:51:22 +08:00
userDescription ;
Add a configuration option for the time source. Signed-off-by: Richard Cochran <richardcochran@gmail.com>
2013-07-06 03:40:06 +08:00
timeSource 0xA0