linuxptp/default.cfg

[global]
#
# Default Data Set
#
twoStepFlag		1
slaveOnly		0
priority1		128
priority2		128
domainNumber		0
clockClass		248
clockAccuracy		0xFE
offsetScaledLogVariance	0xFFFF
free_running		0
freq_est_interval	1
#
# Port Data Set
#
logAnnounceInterval	1
logSyncInterval		0
logMinDelayReqInterval	0
logMinPdelayReqInterval	0
announceReceiptTimeout	3
delayAsymmetry		0
fault_reset_interval	4
neighborPropDelayThresh	20000000
#
# Run time options
#
assume_two_step		0
logging_level		6
path_trace_enabled	0
follow_up_info		0
tx_timestamp_timeout	1
use_syslog		1
verbose			0
summary_interval	0
kernel_leap		1
#
# Servo Options
#
pi_proportional_const	0.0
pi_integral_const	0.0
pi_offset_const         0.0
pi_max_frequency	900000000
clock_servo             pi
#
# Transport options
#
transportSpecific	0x0
ptp_dst_mac		01:1B:19:00:00:00
p2p_dst_mac		01:80:C2:00:00:0E
udp6_scope		0x0E
#
# Default interface options
#
network_transport	UDPv4
delay_mechanism		E2E
time_stamping		hardware
#
# Clock description
#
productDescription      ;;
revisionData            ;;
manufacturerIdentity    00:00:00
ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 07:03:31 +08:00			`[global]`
Add code to read a configuration file. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2011-12-31 16:14:18 +08:00			`#`
			`# Default Data Set`
			`#`
			`twoStepFlag 1`
			`slaveOnly 0`
			`priority1 128`
			`priority2 128`
			`domainNumber 0`
			`clockClass 248`
			`clockAccuracy 0xFE`
			`offsetScaledLogVariance 0xFFFF`
Add an option to configure a free running local clock. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 22:41:36 +08:00			`free_running 0`
Add an option to dial the frequency estimation interval. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 23:14:15 +08:00			`freq_est_interval 1`
Add code to read a configuration file. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2011-12-31 16:14:18 +08:00			`#`
			`# Port Data Set`
			`#`
			`logAnnounceInterval 1`
			`logSyncInterval 0`
			`logMinDelayReqInterval 0`
Replace hard coded logMinPdelayReqInterval with configuration option. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-07-28 04:04:00 +08:00			`logMinPdelayReqInterval 0`
Add code to read a configuration file. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2011-12-31 16:14:18 +08:00			`announceReceiptTimeout 3`
Add asymmetry correction. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> 2012-12-10 21:39:08 +08:00			`delayAsymmetry 0`
Make the fault reset interval a per-port configuration parameter. A timeout of 15 seconds is not always acceptable, make it configurable. By popular consensus, instead of using a linear number of seconds, use the 2^N format for the time interval, just like the other intervals in the PTP data sets. In addition to numeric values, let the configuration file support 'ASAP' to have the fault reset immediately. [RC - moved the handling of special case tmo=0 and added a break out of the fd event loop in case the fds have been closed. - changed the linear seconds option to log second instead. - changed the commit message to reflect the final version. ] Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2013-01-30 23:28:54 +08:00			`fault_reset_interval 4`
Implement neighborPropDelayThresh check in port_capable() Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com> 2013-03-14 03:16:59 +08:00			`neighborPropDelayThresh 20000000`
Make the number of transmit time stamp retries configurable. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-03-21 03:16:58 +08:00			`#`
			`# Run time options`
			`#`
Explicitly set default values for all configurable options. Make it easier to find out the compiled-in defaults in the code and set all options in default.cfg. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> 2012-10-18 19:15:06 +08:00			`assume_two_step 0`
ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 07:03:31 +08:00			`logging_level 6`
Add a configuration option to control the path trace mechanism. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-07 15:16:19 +08:00			`path_trace_enabled 0`
Add a configuration option to control the follow up info TLV. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-09 02:16:47 +08:00			`follow_up_info 0`
ptp4l: Use poll() instead of a try-again loop This patch modifies sk_receive in order to use poll() on POLLERR instead of the tryagain loop as this resolves issues with drivers who do not return timestamps quickly enough. It also resolves the issue of wasting time repeating every microsecond. It lets the kernel sleep our application until the data or timeout arrives. This change also replaces the old tx_timestamp_retries config value with tx_timestamp_timeout specified in milliseconds (the smallest length of time poll accepts). This does have the side effect of increasing the minimum delay before missing a timestamp by up to 1ms, but the poll should return sooner in the normal case where a packet timestamp was not dropped. This change vastly improves some devices and cleans the code up by simplifying a race condition window due to drivers returning tx timestamp on the error queue. [ RC - removed the unused 'try_again' variable. ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> 2013-04-05 23:52:14 +08:00			`tx_timestamp_timeout 1`
ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 07:03:31 +08:00			`use_syslog 1`
			`verbose 0`
Add summary statistics. Add new options to ptp4l and phc2sys to print summary statistics of the clock instead of the individual samples. [ RC - Fix () function prototype with (void). - Use unsigned for sample counter. - Fix over-zealous line breaks. ] Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2013-02-08 02:56:53 +08:00			`summary_interval 0`
Add options to not apply leap seconds in kernel. Add kernel_leap option for ptp4l and -x option for phc2sys to disable setting of the STA_INS/STA_DEL bit to slowly correct the one-second offset by servo. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> 2013-03-08 00:27:33 +08:00			`kernel_leap 1`
ptp4l: update the configuration files this patch updates the default.cfg and gPTP.cfg to show the new defaults Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> 2012-09-29 02:46:05 +08:00			`#`
			`# Servo Options`
			`#`
Make the PI constants configurable. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-05-03 17:17:34 +08:00			`pi_proportional_const 0.0`
			`pi_integral_const 0.0`
ptp4l: update the configuration files this patch updates the default.cfg and gPTP.cfg to show the new defaults Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> 2012-09-29 02:46:05 +08:00			`pi_offset_const 0.0`
Add option to set maximum frequency adjustment. The option sets an additional limit to the hardware limit. It's disabled if set to zero. The default is 900000000 ppb. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> 2013-04-11 02:07:48 +08:00			`pi_max_frequency 900000000`
ptp4l: update the configuration files this patch updates the default.cfg and gPTP.cfg to show the new defaults Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> 2012-09-29 02:46:05 +08:00			`clock_servo pi`
Add a configuration option to specify the L2 MAC addresses. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-07-27 17:30:22 +08:00			`#`
			`# Transport options`
			`#`
			`transportSpecific 0x0`
			`ptp_dst_mac 01:1B:19:00:00:00`
			`p2p_dst_mac 01:80:C2:00:00:0E`
udp6: add an option to set the multicast scope. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-11-26 03:30:14 +08:00			`udp6_scope 0x0E`
ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 07:03:31 +08:00			`#`
			`# Default interface options`
			`#`
			`network_transport UDPv4`
			`delay_mechanism E2E`
			`time_stamping hardware`
config clock description Signed-off-by: Geoff Salmon <gsalmon@se-instruments.com> 2013-02-04 06:01:52 +08:00			`#`
			`# Clock description`
			`#`
			`productDescription ;;`
			`revisionData ;;`
			`manufacturerIdentity 00:00:00`