This patch adds a configuration option that allows running a boundary clock
using "just a bunch of devices". Normally each port is probed to make sure
they all share the same PTP hardware clock, but this option will allow a
heterogeneous collection of devices, should the user really want it.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Instead of setting it to the PTP domain number, add a new option to
ptp4l and phc2sys to set it as needed. The default value is 0. This
allows multiple ptp4l/phc2sys instances running in the same domain.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
This is a simple servo that provides the NTP SHM reference clock. It
doesn't make any clock adjustments and it always returns with the
unlocked state. It writes all samples to the SHM segment and another
process (e.g. chronyd or ntpd) is needed to read the samples and
actually synchronize the clock. The SHM segment number is set to the PTP
domain number to allow multiple SHM reference clocks running at the same
time.
This is mainly useful when other time sources are available on the
system (e.g. NTP, hardware reference clocks, or other PTP domains)
and a fallback to/from PTP is needed.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
This servo uses linear regression to estimate current time and
frequency error. The number of points used in the regression is
variable (from 4 to 64 in powers of 2) and is selected by a long-term
statistic of the prediction error.
Future improvements could include tracking of sudden frequency changes
(e.g. due to temperature variations), better stability of the error
statistic when a large offset is corrected, options to set the speed of
the adaptation, minimum and maximum number of points, or an option to
prefer frequency accuracy over time accuracy.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
These settings will be useful for all implemented servos, so move them
to the common servo code to avoid duplication. The configuration options
are renamed, but the they can be still set by their old names.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
When peer delay is < min_neighbor_prop_delay the port is flagged
as non 802.1AS capable. min_neighbor_prop_delay defaults to -20ms.
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
Add new options delay_filter and delay_filter_length to select the
filter and its length. They set both the clock delay filter and the port
peer delay filter. The default is now moving median with 10 samples.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Check the sanity of the synchronized clock by comparing its uncorrected
frequency with the system monotonic clock. When the measured frequency
offset is larger than the value of the sanity_freq_limit option (20% by
default), a warning message will be printed and the servo will be reset.
Setting the option to zero disables the check.
This is useful to detect when the clock is broken or adjusted by another
program.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Instead of using fixed constants, set them by the following formula from
the current sync to allow good performance of the servo even when the
sync interval changes in runtime and to avoid instability.
kp = min(kp_scale * sync^kp_exponent, kp_norm_max / sync)
ki = min(ki_scale * sync^ki_exponent, ki_norm_max / sync)
The scale, exponent and norm_max constants are configurable. The
defaults are chosen so there is no change to the previous default
constants of the servo with one second sync interval. The automatic
adjustment can be disabled by setting the pi_proportional_const and
pi_integral_const options to a non-zero value, but stability of the
servo is always enforced.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
This patch adds support for using the configured_pi_f_offset servo option to ptp4l.
If "pi_f_offset_const 0.0" is specified in the config file, stepping on the first
update is prevented. If any other positive value is specified, stepping on the
first update occurs when the offset is larger than the specified value.
change since v1
- add the new option to default.cfg and gPTP.cfg
Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com>
This patch adds functions to get int, uint, double value from string
with error checking and range specification.
These functions don't allow overflow and outside of the range values.
In addition, it adds parser_result cases "MALFORMED" and "OUT_OF_RANGE" to make
reason of parse error more clear.
Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com>
This patch simplifies some expressions which validate that configuration
variables are within the allowed ranges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
The option sets an additional limit to the hardware limit. It's disabled
if set to zero. The default is 900000000 ppb.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
This patch modifies sk_receive in order to use poll() on POLLERR instead of the
tryagain loop as this resolves issues with drivers who do not return timestamps
quickly enough. It also resolves the issue of wasting time repeating every
microsecond. It lets the kernel sleep our application until the data or timeout arrives.
This change also replaces the old tx_timestamp_retries config value with
tx_timestamp_timeout specified in milliseconds (the smallest length of time poll
accepts). This does have the side effect of increasing the minimum delay before
missing a timestamp by up to 1ms, but the poll should return sooner in the
normal case where a packet timestamp was not dropped.
This change vastly improves some devices and cleans the code up by simplifying a
race condition window due to drivers returning tx timestamp on the error queue.
[ RC - removed the unused 'try_again' variable. ]
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Add kernel_leap option for ptp4l and -x option for phc2sys to disable
setting of the STA_INS/STA_DEL bit to slowly correct the one-second
offset by servo.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Handle reception of >=3 sequential multiple pdelay responses from
distinct peers as a fault of type FT_BAD_PEER_NETWORK.
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
New clock options should go into 'struct default_ds' so that we can avoid
growing clock_create indefinitely.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Add new options to ptp4l and phc2sys to print summary statistics of the
clock instead of the individual samples.
[ RC - Fix () function prototype with (void).
- Use unsigned for sample counter.
- Fix over-zealous line breaks. ]
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
A timeout of 15 seconds is not always acceptable, make it configurable.
By popular consensus, instead of using a linear number of seconds, use
the 2^N format for the time interval, just like the other intervals in
the PTP data sets. In addition to numeric values, let the configuration
file support 'ASAP' to have the fault reset immediately.
[RC - moved the handling of special case tmo=0 and added a break out
of the fd event loop in case the fds have been closed.
- changed the linear seconds option to log second instead.
- changed the commit message to reflect the final version. ]
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reforming the data structure in this way will greatly simplify the
implementation of the management message for this data set.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
The Linux kernel supports a hardware time stamping mode that allows
sending a one step sync message. This commit adds support for this mode
by expanding the time stamp type enumeration. In order to enable this
mode, the configuration must specify both hardware time stamping and set
the twoStepFlag to false.
We still do not support the one step peer delay request mechanism since
there is neither kernel nor hardware support for it at this time.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
this patch changes sk_interface_phc to sk_get_ts_info, by allowing the function
to store all the data returned by Ethtool's get_ts_info IOCTL in a struct. A new
struct "sk_ts_info" contains the same data as well as a field for specifying the
structure as valid (in order to support old kernels without the IOCTL). The
valid field should be set only when the IOCTL successfully populates the fields.
A follow-on patch will add new functionality possible because of these
changes. This patch only updates the programs which use the call to perform the
minimum they already do, using the new interface.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
- fail on unknown options, bad values and other syntax errors
- fail with more than MAX_PORTS ports
- remove implicit global section
- add error messages
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Now that the code automatically falls back to transport-specific time
stamping, this option is no longer needed.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Jiri Benc <jbenc@redhat.com>
this patch modifies the pi servo to add a configurable max offset (default
infinity). When ever the detected offset is larger than this value, the clock
will jump and reset the servo state. The value of this feature is for decreasing
time to stabalize when clock is off by a large ammount during late running. This
can occur when the upstream master changes, or when the clock is reset due to
outside forces. The method used to reset clock is simply to reset the pi servo
to the unlocked state.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Richard Cochran
Jiri Benc
Miroslav Lichvar
Delio Brignoli
Ken ICHIKAWA
Jacob Keller
Geoff Salmon