Reforming the data structure in this way will greatly simplify the
implementation of the management message for this data set.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reforming the data structure in this way will greatly simplify the
implementation of the management message for this data set.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
The Linux kernel supports a hardware time stamping mode that allows
sending a one step sync message. This commit adds support for this mode
by expanding the time stamp type enumeration. In order to enable this
mode, the configuration must specify both hardware time stamping and set
the twoStepFlag to false.
We still do not support the one step peer delay request mechanism since
there is neither kernel nor hardware support for it at this time.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
this patch changes sk_interface_phc to sk_get_ts_info, by allowing the function
to store all the data returned by Ethtool's get_ts_info IOCTL in a struct. A new
struct "sk_ts_info" contains the same data as well as a field for specifying the
structure as valid (in order to support old kernels without the IOCTL). The
valid field should be set only when the IOCTL successfully populates the fields.
A follow-on patch will add new functionality possible because of these
changes. This patch only updates the programs which use the call to perform the
minimum they already do, using the new interface.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
If a buggy driver or hardware delivers bogus time stamps, then we might
crash with a divide by zero exception.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
We have one timer used for both delay request mechanisms, and we ought
to set the message interval accordingly.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
This fixes the following issue reported by valgrind, which occurs
after a port disable/initialize subsequent to having entered slave
mode.
==10651== Invalid read of size 4
==10651== at 0x804E6E2: fc_clear (port.c:175)
==10651== by 0x805132F: port_event (port.c:1352)
==10651== by 0x804B383: clock_poll (clock.c:597)
==10651== by 0x80498AE: main (ptp4l.c:278)
==10651== Address 0x41cba60 is 16 bytes inside a block of size 60 free'd
==10651== at 0x4023B6A: free (vg_replace_malloc.c:366)
==10651== by 0x804EB09: free_foreign_masters (port.c:287)
==10651== by 0x804FB14: port_disable (port.c:722)
==10651== by 0x8051228: port_dispatch (port.c:1298)
==10651== by 0x804B3C6: clock_poll (clock.c:602)
==10651== by 0x80498AE: main (ptp4l.c:278)
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
this patch allows each port to maintain its own pod structure since it is only
used in ports. This will allow the user to configure any special settings per
port. It takes a copy of the default pod, and a future patch will allow the
configuration file to set per-port specific changes
-v2
* Minor change to fix merge with previous patch
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
the port_open function takes a large number of command options, a few of which
are actually all values of struct interface. This patch modifies the port_open
call to take a struct interface value instead of all the other values. This
simplifies the overall work necessary and allows for adding new port
configuration values by appending them to the struct interface
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
This commit only adds support for forwarding the management messages.
The actual local effects of the management commands still need to be
implemented.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Add transportSpecific parameter to config file parser
Set transportSpecific field in message headers as using the configuration (default to 0)
[ RC - reduced this patch to just the addition of the field ]
Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
An oversize incoming packet might overwrite the reference counter in a
message. Prevent this by providing a buffer large enough for the largest
possible packet.
This will also be needed to support TLV suffixes.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
When computing a port's best foreign master, we make use of a message
reference that possibly might have been dropped by calling msg_put in
the fc_prune subroutine. This commit fixes the issue by copying the
needed data from the message before pruning.
[ Actually, since msg_put only places the message into a list without
altering its contents, there was no ill effect. But using a message
after having released it is just plain wrong. ]
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Under Linux, when the link goes down our multicast socket becomes stale.
We always poll(2) for events, but the link down does not trigger any event
to let us know that something is wrong. Once the port enters master mode
and starts announcing itself, the socket throws an error. This in turn
causes a fault, and we reopen the socket when clearing the fault.
However, in the case of slave only mode, if the port is listening then
it will never send, discover the link error, or repair the socket. This
patch fixes the issue by simply reopening the socket after an announce
timeout.
[ Another way would be to use a netlink socket, but that would add too
much complexity as it poorly matches our port/interface model. ]
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
The message code is horribly broken in three ways.
1. Clearing the message also sets the reference count to zero.
2. The recycling code in msg_put does not test the reference count.
3. The allocation code does not remove the message from the pool,
although this code was never reached because of point 2.
This patch fixes the issues and also adds some debugging code to trace
the message pool statistics.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
If the new ethtool operation is supported, then use it to verify that the PHC
selected by the user is correct. If the user doesn't specify a PHC and ethtool
is supported then automatically select the PHC device.
If the user specifies a PHC device, and the ethtool operation is suppported,
automatically confirm that the PHC device requested is correct. This check is
performed for all ports, in order to verify that a boundary clock setup is
valid.
The check for PHC device validity is not done in the transport because the
only thing necessary for performing the check is the port name. Handled this
in the port_open code instead.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
this patch makes sure every function is checked for a negative return value
and ensures that a fault is detected when these fail
-v2-
* Fixed only check the ones with return value
-v3-
* Modified the delay_req functions to return 0 on nonfault cases
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
This commit makes each pair of port functions, open/close and
initialize/disable, balance each other in how they allocate or free
resources. This change lays some ground work to allow proper fault
handling and disable/enable logic later on.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Richard Cochran
Jacob Keller
Miroslav Lichvar
Delio Brignoli