The message code is horribly broken in three ways.
1. Clearing the message also sets the reference count to zero.
2. The recycling code in msg_put does not test the reference count.
3. The allocation code does not remove the message from the pool,
although this code was never reached because of point 2.
This patch fixes the issues and also adds some debugging code to trace
the message pool statistics.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
If the new ethtool operation is supported, then use it to verify that the PHC
selected by the user is correct. If the user doesn't specify a PHC and ethtool
is supported then automatically select the PHC device.
If the user specifies a PHC device, and the ethtool operation is suppported,
automatically confirm that the PHC device requested is correct. This check is
performed for all ports, in order to verify that a boundary clock setup is
valid.
The check for PHC device validity is not done in the transport because the
only thing necessary for performing the check is the port name. Handled this
in the port_open code instead.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
this patch makes sure every function is checked for a negative return value
and ensures that a fault is detected when these fail
-v2-
* Fixed only check the ones with return value
-v3-
* Modified the delay_req functions to return 0 on nonfault cases
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
This commit makes each pair of port functions, open/close and
initialize/disable, balance each other in how they allocate or free
resources. This change lays some ground work to allow proper fault
handling and disable/enable logic later on.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
It was a cute idea to have the raw Ethernet layer use just one socket,
but it ended up not working on some specific PTP time stamping hardware.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
In the course of development we added more and more allocations into the
port code without freeing them on close. We do not yet call the close
function, so there was never an issue. Once we start to reset the ports,
to clear faults for example, then we will need this.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Although the UDP/IPv4 layer does not need any state per instance (other
than the two file descriptors), the raw Ethernet layer will need this.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
We always wait for the transmit time stamp after sending an event message.
Thus a missing time stamp is clearly a fault, even if the hardware can
only handle one time stamp at a time.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
The state machine needs to know whether a new master has just been
selected in order to choose between the slave and uncalibrated states.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
The timerfd calls are missing from Sourcery CodeBench Lite 2011.09-23.
We can remove this code once these calls are properly integrated into a
current tool chain.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Since the master implementation is still lacking, we will just keep
the slave-only flag hard coded for now.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Richard Cochran
Jacob Keller