chao
/
linuxptp
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Minor documentation improvements. 

Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
master
Miroslav Lichvar 2013-06-18 15:52:31 +02:00 committed by Richard Cochran
parent f657e47c26
commit b796d90e80
2 changed files with 9 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
phc2sys.8
View File

@ -40,9 +40,9 @@ program.
Two synchronization modes are supported, one uses a pulse per second (PPS) Two synchronization modes are supported, one uses a pulse per second (PPS)
signal provided by the source clock and the other mode reads time from the signal provided by the source clock and the other mode reads time from the
source clock directly. The PPS mode is usually preferred, because reading the source clock directly. Some clocks can be used in both modes, the mode which
PHC is slow and introduces an unknown error in the readings, but not all PHCs will synchronize the slave clock with better accuracy depends on hardware and
provide the PPS signal. driver implementation.
.SH OPTIONS .SH OPTIONS
.TP .TP
@ -58,7 +58,7 @@ option should be used too. This option can be used only with the system clock as
the slave clock. the slave clock.
.TP .TP
.BI \-s " device" .BI \-s " device"
Specify the master clock by device (e.g. dev/ptp0) or interface (e.g. eth0) or Specify the master clock by device (e.g. /dev/ptp0) or interface (e.g. eth0) or
by name (e.g. CLOCK_REALTIME for the system clock). When this option is used by name (e.g. CLOCK_REALTIME for the system clock). When this option is used
together with the together with the
.B \-d .B \-d

7
ptp4l.8
View File

@ -32,10 +32,13 @@ a peer delay request is received.
.TP .TP
.B \-E .B \-E
Select the delay request-response (E2E) mechanism. This is the default Select the delay request-response (E2E) mechanism. This is the default
mechanism. mechanism. All clocks on single PTP communication path must use the same
mechanism. A warning will be printed when a peer delay request is received on
port using the E2E mechanism.
.TP .TP
.B \-P .B \-P
Select the peer delay (P2P) mechanism. Select the peer delay (P2P) mechanism. A warning will be printed when a delay
request is received on port using the P2P mechanism.
.TP .TP
.B \-2 .B \-2
Select the IEEE 802.3 network transport. Select the IEEE 802.3 network transport.