220 lines
6.2 KiB
Groff
220 lines
6.2 KiB
Groff
.TH PHC2SYS 8 "November 2012" "linuxptp"
|
|
.SH NAME
|
|
phc2sys \- synchronize two clocks
|
|
|
|
.SH SYNOPSIS
|
|
.B phc2sys
|
|
[
|
|
.B \-wmqvx
|
|
] [
|
|
.BI \-d " pps-device"
|
|
] [
|
|
.BI \-s " device"
|
|
] [
|
|
.BI \-c " device"
|
|
] [
|
|
.BI \-O " offset"
|
|
] [
|
|
.BI \-P " kp"
|
|
] [
|
|
.BI \-I " ki"
|
|
] [
|
|
.BI \-R " update-rate"
|
|
] [
|
|
.BI \-N " clock-readings"
|
|
] [
|
|
.BI \-u " summary-updates"
|
|
] [
|
|
.BI \-n " domain-number"
|
|
] [
|
|
.BI \-l " print-level"
|
|
]
|
|
|
|
.SH DESCRIPTION
|
|
.B phc2sys
|
|
is a program which synchronizes two clocks in the system. Typically, it is used
|
|
to synchronize the system clock to a PTP hardware clock (PHC), which itself is
|
|
synchronized by the
|
|
.BR ptp4l (8)
|
|
program.
|
|
|
|
Two synchronization modes are supported, one uses a pulse per second (PPS)
|
|
signal provided by the source clock and the other mode reads time from the
|
|
source clock directly. The PPS mode is usually preferred, because reading the
|
|
PHC is slow and introduces an unknown error in the readings, but not all PHCs
|
|
provide the PPS signal.
|
|
|
|
.SH OPTIONS
|
|
.TP
|
|
.BI \-d " pps-device"
|
|
Specify the PPS device of the master clock (e.g. /dev/pps0). With this option
|
|
the PPS synchronization mode is used instead of the direct mode. As the PPS
|
|
signal does not specify time and only marks start of a second, the slave clock
|
|
should be already close to the correct time before
|
|
.B phc2sys
|
|
is started or the
|
|
.B \-s
|
|
option should be used too. This option can be used only with the system clock as
|
|
the slave clock.
|
|
.TP
|
|
.BI \-s " device"
|
|
Specify the master clock by device (e.g. dev/ptp0) or interface (e.g. eth0) or
|
|
by name (e.g. CLOCK_REALTIME for the system clock). When this option is used
|
|
together with the
|
|
.B \-d
|
|
option, the master clock is used only to correct the offset by whole number of
|
|
seconds, which cannot be fixed with PPS alone.
|
|
.TP
|
|
.BI \-i " interface"
|
|
Performs the exact same function as
|
|
.B \-s
|
|
for compatibility reasons. Previously enabled specifying master clock by network
|
|
interface. However, this can now be done using
|
|
.B \-s
|
|
and this option is no longer necessary. As such it has been deprecated, and
|
|
should no longer be used.
|
|
.TP
|
|
.BI \-c " device"
|
|
Specify the slave clock by device (e.g. /dev/ptp1) or interface (e.g. eth1) or
|
|
by name. The default is CLOCK_REALTIME (the system clock).
|
|
.TP
|
|
.BI \-P " kp"
|
|
Specify the proportional constant of the PI controller. The default is 0.7.
|
|
.TP
|
|
.BI \-I " ki"
|
|
Specify the integral constant of the PI controller. The default is 0.3.
|
|
.TP
|
|
.BI \-S " step"
|
|
Specify the step threshold of the PI controller. It is the maximum offset that
|
|
the controller corrects by changing the clock frequency instead of stepping the
|
|
clock. The clock is always stepped on start. The value of 0.0 disables stepping
|
|
after the start. The default is 0.0.
|
|
.TP
|
|
.BI \-R " update-rate"
|
|
Specify the slave clock update rate when running in the direct synchronization
|
|
mode. The default is 1 per second.
|
|
.TP
|
|
.BI \-N " phc-num"
|
|
Specify the number of master clock readings per one slave clock update. Only
|
|
the fastest reading is used to update the slave clock, this is useful to
|
|
minimize the error caused by random delays in scheduling and bus utilization.
|
|
The default is 5.
|
|
.TP
|
|
.BI \-O " offset"
|
|
Specify the offset between the slave and master times in seconds. See
|
|
.SM
|
|
.B TIME SCALE USAGE
|
|
below.
|
|
.TP
|
|
.BI \-u " summary-updates"
|
|
Specify the number of clock updates included in summary statistics. The
|
|
statistics include offset root mean square (RMS), maximum absolute offset,
|
|
frequency offset mean and standard deviation, and mean of the delay in clock
|
|
readings and standard deviation. The units are nanoseconds and parts per
|
|
billion (ppb). If zero, the individual samples are printed instead of the
|
|
statistics. The messages are printed at the LOG_INFO level.
|
|
The default is 0 (disabled).
|
|
.TP
|
|
.B \-w
|
|
Wait until ptp4l is in a synchronized state. If the
|
|
.B \-O
|
|
option is not used, also keep the offset between the slave and master
|
|
times updated according to the currentUtcOffset value obtained from ptp4l and
|
|
the direction of the clock synchronization.
|
|
.TP
|
|
.BI \-n " domain-number"
|
|
Specify the domain number used by ptp4l. The default is 0.
|
|
.TP
|
|
.B \-x
|
|
When a leap second is announced, don't apply it in the kernel by stepping the
|
|
clock, but let the servo correct the one-second offset slowly by changing the
|
|
clock frequency (unless the
|
|
.B \-S
|
|
option is used).
|
|
.TP
|
|
.BI \-l " print-level"
|
|
Set the maximum syslog level of messages which should be printed or sent to
|
|
the system logger. The default is 6 (LOG_INFO).
|
|
.TP
|
|
.B \-m
|
|
Print messages to the standard output.
|
|
.TP
|
|
.B \-q
|
|
Don't send messages to the system logger.
|
|
.TP
|
|
.BI \-h
|
|
Display a help message.
|
|
.TP
|
|
.B \-v
|
|
Prints the software version and exits.
|
|
|
|
.SH TIME SCALE USAGE
|
|
|
|
.B Ptp4l
|
|
uses either PTP time scale or UTC (Coordinated Universal Time) time
|
|
scale. PTP time scale is continuous and shifted against UTC by a few tens of
|
|
seconds as PTP time scale does not apply leap seconds.
|
|
|
|
In hardware time stamping mode,
|
|
.B ptp4l
|
|
announces use of PTP time scale and PHC
|
|
is used for the stamps. That means PHC must follow PTP time scale while system
|
|
clock follows UTC. Time offset between these two is maintained by
|
|
.BR phc2sys .
|
|
|
|
.B Phc2sys
|
|
acquires the offset value either by reading it from ptp4l when
|
|
.B \-w
|
|
is in effect or from command line when
|
|
.B \-O
|
|
is supplied. Failure to maintain the correct offset can result in local system
|
|
clock being off some seconds to domain master system clock when in slave mode,
|
|
or incorect PTP time announced to the network in case the host is the domain
|
|
master.
|
|
|
|
.SH EXAMPLES
|
|
|
|
The host is a domain master, PTP clock is synchronized to system clock and the
|
|
time offset is obtained from
|
|
.BR ptp4l .
|
|
.B Phc2sys
|
|
waits for
|
|
.B ptp4l
|
|
to get at least one port in master or slave mode before starting the
|
|
synchronization.
|
|
|
|
.RS
|
|
\f(CWphc2sys \-c /dev/ptp0 \-s CLOCK_REALTIME \-w\fP
|
|
.RE
|
|
|
|
Same as above, time offset is provided on command line and
|
|
.B phc2sys
|
|
does not wait for
|
|
.BR ptp4l .
|
|
|
|
.RS
|
|
\f(CWphc2sys \-c /dev/ptp0 \-s CLOCK_REALTIME \-O 35\fP
|
|
.RE
|
|
|
|
The host is in slave mode, system clock is synchronized from PTP clock,
|
|
.B phc2sys
|
|
waits for
|
|
.B ptp4l
|
|
and the offset is set automatically.
|
|
|
|
.RS
|
|
\f(CWphc2sys \-s /dev/ptp0 \-w\fP
|
|
.RE
|
|
|
|
Same as above, PTP clock id is read from the network interface, the offset is
|
|
provided on command line
|
|
.B phc2sys
|
|
does not wait.
|
|
|
|
.RS
|
|
\f(CWphc2sys \-s eth0 \-O \-35\fP
|
|
.RE
|
|
|
|
.SH SEE ALSO
|
|
.BR ptp4l (8)
|