352 lines
10 KiB
Groff
352 lines
10 KiB
Groff
.TH TIMEMASTER 8 "October 2014" "linuxptp"
|
|
.SH NAME
|
|
|
|
timemaster - run NTP with PTP as reference clocks
|
|
|
|
.SH SYNOPSIS
|
|
|
|
.B timemaster
|
|
[
|
|
.B \-nmqv
|
|
] [
|
|
.BI \-l " print-level"
|
|
]
|
|
.BI \-f " file"
|
|
|
|
.SH DESCRIPTION
|
|
\fBtimemaster\fR is a program that uses \fBptp4l\fR and \fBphc2sys\fR in
|
|
combination with \fBchronyd\fR or \fBntpd\fR to synchronize the system clock to
|
|
NTP and PTP time sources. The PTP time is provided by \fBphc2sys\fR and
|
|
\fBptp4l\fR via SHM reference clocks to \fBchronyd\fR/\fBntpd\fR, which
|
|
can compare all time sources and use the best sources to synchronize the system
|
|
clock.
|
|
|
|
On start, \fBtimemaster\fR reads a configuration file that specifies the NTP
|
|
and PTP time sources, checks which network interfaces have and share a PTP
|
|
hardware clock (PHC), generates configuration files for \fBptp4l\fR and
|
|
\fBchronyd\fR/\fBntpd\fR, and start the \fBptp4l\fR, \fBphc2sys\fR,
|
|
\fBchronyd\fR/\fBntpd\fR processes as needed. Then, it waits for a signal to
|
|
kill the processes, remove the generated configuration files and exit.
|
|
|
|
.SH OPTIONS
|
|
|
|
.TP
|
|
.BI \-f " file"
|
|
Specify the path to the \fBtimemaster\fR configuration file.
|
|
.TP
|
|
.BI \-n
|
|
Don't start the programs, only print their configuration files and the commands
|
|
that would be executed if this option wasn't specified.
|
|
.TP
|
|
.BI \-l " level"
|
|
Set the maximum syslog level of messages which should be printed or sent to
|
|
the system logger. The default value is 6 (LOG_INFO).
|
|
.TP
|
|
.B \-m
|
|
Print messages to the standard output.
|
|
.TP
|
|
.B \-q
|
|
Don't send messages to the system logger.
|
|
.TP
|
|
.B \-v
|
|
Print the software version and exit.
|
|
.TP
|
|
.BI \-h
|
|
Display a help message and exit.
|
|
|
|
.SH CONFIGURATION FILE
|
|
|
|
The configuration file is divided into sections. Each section starts with a
|
|
line containing its name enclosed in brackets and it follows with settings.
|
|
Each setting is placed on a separate line, it contains the name of the
|
|
option and the value separated by whitespace characters. Empty lines and lines
|
|
starting with # are ignored.
|
|
|
|
Sections that can used in the configuration file and options that can be set in
|
|
them are described below.
|
|
|
|
.SS [timemaster]
|
|
|
|
.TP
|
|
.B ntp_program
|
|
Select which NTP implementation should be used. Possible values are
|
|
\fBchronyd\fR and \fBntpd\fR. The default value is \fBchronyd\fR. Limitations
|
|
of the implementations relevant to the timemaster configuration are listed in
|
|
\fBNOTES\fR.
|
|
|
|
.TP
|
|
.B rundir
|
|
Specify the directory where should be generated \fBchronyd\fR, \fBntpd\fR and
|
|
\fBptp4l\fR configuration files and sockets. The directory will be created if
|
|
it doesn't exist. The default value is \fB/var/run/timemaster\fR.
|
|
|
|
.SS [ntp_server address]
|
|
|
|
The \fBntp_server\fR section specifies an NTP server that should be used as a
|
|
time source. The address of the server is included in the name of the section.
|
|
|
|
.TP
|
|
.B minpoll
|
|
.TQ
|
|
.B maxpoll
|
|
Specify the minimum and maximum NTP polling interval as powers of two in
|
|
seconds. The default values are 6 (64 seconds) and 10 (1024 seconds)
|
|
respectively. Shorter polling intervals usually improve the accuracy
|
|
significantly, but they should be used only when allowed by the operators of
|
|
the NTP service (public NTP servers generally don't allow too frequent
|
|
queries). If the NTP server is located on the same LAN, polling intervals
|
|
around 4 (16 seconds) might give best accuracy.
|
|
|
|
.TP
|
|
.B iburst
|
|
Enable or disable sending a burst of NTP packets on start to speed up the
|
|
initial synchronization. Possible values are 1 and 0. The default value is 0
|
|
(disabled).
|
|
|
|
.TP
|
|
.B ntp_options
|
|
Specify extra options that should be added for this source to the \fBserver\fR
|
|
directive in the configuration file of the selected NTP implementation. No
|
|
extra options are added by default.
|
|
|
|
.SS [ptp_domain number]
|
|
|
|
The \fBptp_domain\fR section specifies a PTP domain that should be used as a
|
|
time source. The PTP domain number is included in the name of the section. The
|
|
\fBptp4l\fR instances are configured to run in the \fBslaveOnly\fR mode. In
|
|
this section at least the \fBinterfaces\fR option needs to be set, other
|
|
options are optional.
|
|
|
|
.TP
|
|
.B interfaces
|
|
Specify which network interfaces should be used for this PTP domain. A separate
|
|
\fBptp4l\fR instance will be started for each group of interfaces sharing the
|
|
same PHC and for each interface that supports only SW time stamping. HW time
|
|
stamping is enabled automatically. If an interface with HW time stamping is
|
|
specified also in other PTP domains, only the \fBptp4l\fR instance from the
|
|
first PTP domain will be using HW time stamping.
|
|
|
|
.TP
|
|
.B ntp_poll
|
|
Specify the polling interval of the NTP SHM reference clock reading samples
|
|
from \fBptp4l\fR or \fBphc2sys\fR. It's specified as a power of two in seconds.
|
|
The default value is 2 (4 seconds).
|
|
|
|
.TP
|
|
.B phc2sys_poll
|
|
Specify the polling interval used by \fBphc2sys\fR to read a PTP clock
|
|
synchronized by \fBptp4l\fR and update the SHM sample for
|
|
\fBchronyd\fR/\fBntpd\fR. It's specified as a power of two in seconds. The
|
|
default value is 0 (1 second).
|
|
|
|
.TP
|
|
.B delay
|
|
Specify the maximum assumed roundtrip delay to the primary source of the time
|
|
in this PTP domain. This value is included in the distance used by
|
|
\fBchronyd\fR in the source selection algorithm to detect falsetickers and
|
|
assign weights for source combining. The default value is 1e\-4 (100
|
|
microseconds). With \fBntpd\fR, the \fBtos mindist\fR command can be used to
|
|
set a limit with similar purpose globally for all time sources.
|
|
|
|
.TP
|
|
.B ntp_options
|
|
Specify extra options that should be added for this source to the
|
|
\fBrefclock\fR or \fBserver\fR directives in the configuration file of the
|
|
selected NTP implementation. No extra options are added by default.
|
|
|
|
.TP
|
|
.B ptp4l_option
|
|
Specify an extra \fBptp4l\fR option specific to this PTP domain that should be
|
|
added to the configuration files generated for \fBptp4l\fR. This option may be
|
|
used multiple times in one \fBptp_domain\fR section.
|
|
|
|
.SS [chronyd]
|
|
|
|
.TP
|
|
.B path
|
|
Specify the path to the \fBchronyd\fR binary. The default value is
|
|
\fBchronyd\fR to search for the binary in \fBPATH\fR.
|
|
|
|
.TP
|
|
.B options
|
|
Specify extra options that should be added to the \fBchronyd\fR command line.
|
|
No extra options are added by default.
|
|
|
|
.SS [chrony.conf]
|
|
|
|
Settings specified in this section are copied directly to the configuration
|
|
file generated for \fBchronyd\fR. If this section is not present in the
|
|
\fBtimemaster\fR configuration file, the following setting will be added:
|
|
|
|
.EX
|
|
makestep 1 3
|
|
.EE
|
|
|
|
This configures \fBchronyd\fR to step the system clock in the first three
|
|
updates if the offset is larger than 1 second.
|
|
|
|
.SS [ntpd]
|
|
|
|
.TP
|
|
.B path
|
|
Specify the path to the \fBntpd\fR binary. The default value is \fBntpd\fR to
|
|
search for the binary in \fBPATH\fR.
|
|
|
|
.TP
|
|
.B options
|
|
Specify extra options that should be added to the \fBntpd\fR command line. No
|
|
extra options are added by default.
|
|
|
|
.SS [ntp.conf]
|
|
|
|
Settings specified in this section are copied directly to the configuration
|
|
file generated for \fBntpd\fR. If this section is not present in the
|
|
\fBtimemaster\fR configuration file, the following settings will be added:
|
|
|
|
.EX
|
|
restrict default nomodify notrap nopeer noquery
|
|
restrict 127.0.0.1
|
|
restrict ::1
|
|
.EE
|
|
|
|
This configures \fBntpd\fR to use safe default restrictions.
|
|
|
|
.SS [phc2sys]
|
|
|
|
.TP
|
|
.B path
|
|
Specify the path to the \fBphc2sys\fR binary. The default value is
|
|
\fBphc2sys\fR to search for the binary in \fBPATH\fR.
|
|
|
|
.TP
|
|
.B options
|
|
Specify extra options that should be added to all \fBphc2sys\fR command lines.
|
|
By default, \fB\-l 5\fR is added to the command lines.
|
|
|
|
.SS [ptp4l]
|
|
|
|
.TP
|
|
.B path
|
|
Specify the path to the \fBptp4l\fR binary. The default value is \fBptp4l\fR to
|
|
search for the binary in \fBPATH\fR.
|
|
|
|
.TP
|
|
.B options
|
|
Specify extra options that should be added to all \fBptp4l\fR command lines. By
|
|
default, \fB\-l 5\fR is added to the command lines.
|
|
|
|
.SS [ptp4l.conf]
|
|
Settings specified in this section are copied directly to the configuration
|
|
files generated for all \fBptp4l\fR instances. There is no default content of
|
|
this section.
|
|
|
|
.SH NOTES
|
|
For best accuracy, \fBchronyd\fR is usually preferred over \fBntpd\fR, it also
|
|
synchronizes the system clock faster. Both NTP implementations, however, have
|
|
some limitations that need to be considered before choosing the one to be used
|
|
in a given \fBtimemaster\fR configuration.
|
|
|
|
The \fBchronyd\fR limitations are:
|
|
|
|
.RS
|
|
In version 1.31 and older, the maximum number of reference clocks used at the
|
|
same time is 8. This limits the number of PHCs and interfaces using SW time
|
|
stamping that can be used for PTP.
|
|
|
|
Using polling intervals (\fBminpoll\fR, \fBmaxpoll\fR, \fBntp_poll\fR options)
|
|
shorter than 2 (4 seconds) is not recommended with versions before 1.30. With
|
|
1.30 and later values of 0 or 1 can be used for NTP sources and negative values
|
|
for PTP sources (\fBntp_poll\fR) to specify a subsecond interval.
|
|
.RE
|
|
|
|
The \fBntpd\fR limitations are:
|
|
|
|
.RS
|
|
In versions before 4.2.8p1, only the first two shared-memory segments created by
|
|
the \fBntpd\fR SHM refclock driver have owner-only access. Other segments
|
|
are created with world access, which allows any user on the system to write to
|
|
the segments and disrupt or take control over the synchronization of the clock.
|
|
In 4.2.8p1 the access was made configurable with the mode option, which is set
|
|
by \fBtimemaster\fR for owner-ownly access.
|
|
|
|
The shortest polling interval for all sources is 3 (8 seconds).
|
|
|
|
Nanosecond resolution in the SHM refclock driver is supported in version
|
|
4.2.7p303 and later, older versions have only microsecond resolution.
|
|
.RE
|
|
|
|
.SH EXAMPLES
|
|
|
|
A minimal configuration file using one NTP source and two PTP sources would be:
|
|
|
|
.EX
|
|
[ntp_server 10.1.1.1]
|
|
|
|
[ptp_domain 0]
|
|
interfaces eth0
|
|
|
|
[ptp_domain 1]
|
|
interfaces eth1
|
|
.EE
|
|
|
|
A more complex example using all \fBtimemaster\fR options would be:
|
|
|
|
.EX
|
|
[ntp_server 10.1.1.1]
|
|
minpoll 3
|
|
maxpoll 4
|
|
iburst 1
|
|
ntp_options key 12
|
|
|
|
[ptp_domain 0]
|
|
interfaces eth0 eth1
|
|
ntp_poll 0
|
|
phc2sys_poll \-2
|
|
delay 10e\-6
|
|
ntp_options prefer
|
|
ptp4l_option clock_servo linreg
|
|
ptp4l_option delay_mechanism P2P
|
|
|
|
[timemaster]
|
|
ntp_program chronyd
|
|
rundir /var/run/timemaster
|
|
|
|
[chronyd]
|
|
path /usr/sbin/chronyd
|
|
options
|
|
|
|
[chrony.conf]
|
|
makestep 1 3
|
|
logchange 0.5
|
|
rtcsync
|
|
driftfile /var/lib/chrony/drift
|
|
|
|
[ntpd]
|
|
path /usr/sbin/ntpd
|
|
options \-u ntp:ntp
|
|
|
|
[ntp.conf]
|
|
restrict default nomodify notrap nopeer noquery
|
|
restrict 127.0.0.1
|
|
restrict ::1
|
|
driftfile /var/lib/ntp/drift
|
|
|
|
[phc2sys]
|
|
path /usr/sbin/phc2sys
|
|
options \-l 5
|
|
|
|
[ptp4l]
|
|
path /usr/sbin/ptp4l
|
|
options
|
|
|
|
[ptp4l.conf]
|
|
logging_level 5
|
|
.EE
|
|
|
|
.SH SEE ALSO
|
|
|
|
.BR chronyd (8),
|
|
.BR ntpd (8),
|
|
.BR phc2sys (8),
|
|
.BR ptp4l (8)
|