299 lines
7.8 KiB
Groff
299 lines
7.8 KiB
Groff
.TH PTP4l 8 "November 2012" "linuxptp"
|
|
.SH NAME
|
|
ptp4l \- PTP Boundary/Ordinary Clock
|
|
|
|
.SH SYNOPSIS
|
|
.B ptp4l
|
|
[
|
|
.B \-A
|
|
|
|
|
.B \-E
|
|
|
|
|
.B \-P
|
|
] [
|
|
.B \-2
|
|
|
|
|
.B \-4
|
|
|
|
|
.B \-6
|
|
] [
|
|
.B \-H
|
|
|
|
|
.B \-S
|
|
|
|
|
.B \-L
|
|
] [
|
|
.BI \-f " config"
|
|
] [
|
|
.BI \-p " phc-device"
|
|
] [
|
|
.B \-s
|
|
] [
|
|
.BI \-l " print-level"
|
|
] [
|
|
.B \-q
|
|
] [
|
|
.B \-v
|
|
]
|
|
[
|
|
.BI \-i " interface"
|
|
]
|
|
.I .\|.\|.
|
|
|
|
.SH DESCRIPTION
|
|
.B ptp4l
|
|
is an implementation of the Precision Time Protocol (PTP) according to IEEE
|
|
standard 1588 for Linux. It implements Boundary Clock (BC) and Ordinary Clock
|
|
(OC).
|
|
|
|
.SH OPTIONS
|
|
.TP
|
|
.B \-A
|
|
Select the delay mechanism automatically. Start with E2E and switch to P2P when
|
|
a peer delay request is received.
|
|
.TP
|
|
.B \-E
|
|
Select the delay request-response (E2E) mechanism. This is the default
|
|
mechanism.
|
|
.TP
|
|
.B \-P
|
|
Select the peer delay (P2P) mechanism.
|
|
.TP
|
|
.B \-2
|
|
Select the IEEE 802.3 network transport.
|
|
.TP
|
|
.B \-4
|
|
Select the UDP IPv4 network transport. This is the default transport.
|
|
.TP
|
|
.B \-6
|
|
Select the UDP IPv6 network transport.
|
|
.TP
|
|
.B \-H
|
|
Select the hardware time stamping. All ports specified by the
|
|
.B \-i
|
|
option and in the configuration file must be attached to the same PTP hardware
|
|
clock (PHC). This is the default time stamping.
|
|
.TP
|
|
.B \-S
|
|
Select the software time stamping.
|
|
.TP
|
|
.B \-L
|
|
Select the legacy hardware time stamping.
|
|
.TP
|
|
.BI \-f " config"
|
|
Read configuration from the specified file. No configuration file is read by
|
|
default.
|
|
.TP
|
|
.BI \-p " phc-device"
|
|
With hardware time stamping, force which PHC device (e.g. /dev/ptp0) should be
|
|
used.
|
|
.TP
|
|
.B \-s
|
|
Enable the slaveOnly mode.
|
|
.TP
|
|
.BI \-l " print-level"
|
|
Set the maximum syslog level of messages which should be printed or sent to
|
|
the system logger. The default is 6 (LOG_INFO).
|
|
.TP
|
|
.B \-q
|
|
Don't send messages to the system logger.
|
|
.TP
|
|
.B \-v
|
|
Print messages to the standard output.
|
|
.TP
|
|
.BI \-i " interface"
|
|
Specify a PTP port, it may be used multiple times. At least one port must be
|
|
specified by this option or in the configuration file.
|
|
.TP
|
|
.BI \-h
|
|
Display a help message.
|
|
|
|
.SH CONFIGURATION FILE
|
|
|
|
The configuration file is divided into sections. Each section starts with a
|
|
line containing its name enclosed in brackets and it follows with settings.
|
|
Each setting is placed on a separate line, it contains the name of the
|
|
option and the value separated by whitespace characters. Empty lines and lines
|
|
starting with # are ignored.
|
|
|
|
The global section (indicated as
|
|
.BR [global] )
|
|
sets the program options, clock options and default port options. Other
|
|
sections are port specific sections and they override the default port options.
|
|
The name of the section is the name of the configured port (e.g.
|
|
.BR [eth0] ).
|
|
Ports specified in the configuration file don't need to be
|
|
specified by the
|
|
.B \-i
|
|
option. An empty port section can be used to replace the command line option.
|
|
|
|
.SH PORT OPTIONS
|
|
|
|
.TP
|
|
.B logAnnounceInterval
|
|
The mean time interval between Announce messages. A shorter interval makes
|
|
ptp4l react faster to the changes in the master-slave hierarchy. The interval
|
|
should be the same in the whole domain. It's specified as a power of two in
|
|
seconds.
|
|
The default is 1 (2 seconds).
|
|
.TP
|
|
.B logSyncInterval
|
|
The mean time interval between Sync messages. A shorter interval may improve
|
|
accuracy of the local clock. It's specified as a power of two in seconds.
|
|
The default is 0 (1 second).
|
|
.TP
|
|
.B logMinDelayReqInterval
|
|
The minimum permitted mean time interval between Delay_Req messages. A shorter
|
|
interval makes ptp4l react faster to the changes in the path delay. It's
|
|
specified as a power of two in seconds.
|
|
The default is 0 (1 second).
|
|
.TP
|
|
.B logMinPdelayReqInterval
|
|
The minimum permitted mean time interval between Pdelay_Req messages. It's
|
|
specified as a power of two in seconds.
|
|
The default is 0 (1 second).
|
|
.TP
|
|
.B announceReceiptTimeout
|
|
The number of missed Announce messages before the last Announce messages
|
|
expires.
|
|
The default is 3.
|
|
.TP
|
|
.B transportSpecific
|
|
The transport specific field. Must be in the range 0 to 255.
|
|
The default is 0.
|
|
.TP
|
|
.B path_trace_enabled
|
|
Enable the mechanism used to trace the route of the Announce messages.
|
|
The default is 0 (disabled).
|
|
.TP
|
|
.B follow_up_info
|
|
Include the 802.1AS data in the Follow_Up messages if enabled.
|
|
The default is 0 (disabled).
|
|
.TP
|
|
.B delay_mechanism
|
|
Select the delay mechanism. Possible values are E2E, P2P and Auto.
|
|
The default is E2E.
|
|
.TP
|
|
.B network_transport
|
|
Select the network transport. Possible values are UDPv4, UDPv6 and L2.
|
|
The default is UDPv4.
|
|
|
|
.SH PROGRAM AND CLOCK OPTIONS
|
|
|
|
.TP
|
|
.B twoStepFlag
|
|
The local clock is a two-step clock if enabled. One-step clocks are not
|
|
supported yet.
|
|
The default is 1 (enabled).
|
|
.TP
|
|
.B slaveOnly
|
|
The local clock is a slave-only clock if enabled.
|
|
The default is 0 (disabled).
|
|
.TP
|
|
.B priority1
|
|
The priority1 attribute of the local clock. It is used in the best master
|
|
selection algorithm, lower values take precedence. Must be in the range 0 to
|
|
255.
|
|
The default is 128.
|
|
.TP
|
|
.B priority2
|
|
The priority2 attribute of the local clock. It is used in the best master
|
|
selection algorithm, lower values take precedence. Must be in the range 0 to
|
|
255.
|
|
The default is 128.
|
|
.TP
|
|
.B clockClass
|
|
The clockClass attribute of the local clock. It denotes the traceability of the
|
|
time distributed by the grandmaster clock.
|
|
The default is 248.
|
|
.TP
|
|
.B clockAccuracy
|
|
The clockAccuracy attribute of the local clock. It is used in the best master
|
|
selection algorithm.
|
|
The default is 0xFE.
|
|
.TP
|
|
.B offsetScaledLogVariance
|
|
The offsetScaledLogVariance attribute of the local clock. It characterizes the
|
|
stability of the clock.
|
|
The default is 0xFFFF.
|
|
.TP
|
|
.B domainNumber
|
|
The domain attribute of the local clock.
|
|
The default is 0.
|
|
.TP
|
|
.B free_running
|
|
Don't adjust the local clock if enabled.
|
|
The default is 0 (disabled).
|
|
.TP
|
|
.B freq_est_interval
|
|
The time interval over which is estimated the ratio of the local and
|
|
peer clock frequencies. It is specified as a power of two in seconds.
|
|
The default is 1 (2 seconds).
|
|
.TP
|
|
.B assume_two_step
|
|
Treat one-step responses as two-step if enabled. It is used to work around
|
|
buggy 802.1AS switches.
|
|
The default is 0 (disabled).
|
|
.TP
|
|
.B tx_timestamp_retries
|
|
The number of retries to fetch the tx time stamp from the kernel when a message
|
|
is sent.
|
|
The default is 100.
|
|
.TP
|
|
.B clock_servo
|
|
The servo which is used to synchronize the local clock. Currently only one
|
|
servo is implemented, a PI controller.
|
|
The default is pi.
|
|
.TP
|
|
.B pi_proportional_const
|
|
The proportional constant of the PI controller. When set to 0.0, the value will
|
|
be selected from 0.7 and 0.1 for the hardware and software time stamping
|
|
respectively.
|
|
The default is 0.0.
|
|
.TP
|
|
.B pi_integral_const
|
|
The integral constant of the PI controller. When set to 0.0, the value will be
|
|
selected from 0.3 and 0.001 for the hardware and software time stamping
|
|
respectively.
|
|
The default is 0.0.
|
|
.TP
|
|
.B pi_offset_const
|
|
The maximum offset the PI controller will correct by changing the clock
|
|
frequency instead of stepping the clock. When set to 0.0, the controller will
|
|
never step the clock.
|
|
The default is 0.0.
|
|
.TP
|
|
.B ptp_dst_mac
|
|
The MAC address where should be PTP messages sent.
|
|
Relevant only with L2 transport. The default is 01:1B:19:00:00:00.
|
|
.TP
|
|
.B p2p_dst_mac
|
|
The MAC address where should be peer delay messages the PTP peer.
|
|
Relevant only with L2 transport. The default is 01:80:C2:00:00:0E.
|
|
.TP
|
|
.B udp6_scope
|
|
Specifies the desired scope for the IPv6 multicast messages. This
|
|
will be used as the second byte of the primary address. This option
|
|
is only relevant with IPv6 transport. See RFC 4291. The default is
|
|
0x0E for the global scope.
|
|
.TP
|
|
.B logging_level
|
|
The maximum logging level of messages which should be printed.
|
|
The default is 6 (LOG_INFO).
|
|
.TP
|
|
.B verbose
|
|
Print messages to the standard output if enabled.
|
|
The default is 0 (disabled).
|
|
.TP
|
|
.B use_syslog
|
|
Print messages to the system log if enabled.
|
|
The default is 1 (enabled).
|
|
.TP
|
|
.B time_stamping
|
|
The time stamping method. The allowed values are hardware, software and legacy.
|
|
The default is hardware.
|
|
|
|
.SH SEE ALSO
|
|
.BR pmc (8),
|
|
.BR phc2sys (8)
|