fixed hyphen/minus signs in groff

in manpages, the '-' denotes a hyphen.
for a proper minus, we need to write '\-'

Signed-off-by: IOhannes m zmölnig <zmoelnig@umlaeute.mur.at>
master
IOhannes m zmölnig 2015-06-08 09:34:42 +02:00 committed by Richard Cochran
parent 6415f56acb
commit 0e1b25176d
2 changed files with 11 additions and 11 deletions

View File

@ -1,6 +1,6 @@
.TH PTP4l 8 "December 2014" "linuxptp" .TH PTP4l 8 "December 2014" "linuxptp"
.SH NAME .SH NAME
ptp4l \- PTP Boundary/Ordinary Clock ptp4l - PTP Boundary/Ordinary Clock
.SH SYNOPSIS .SH SYNOPSIS
.B ptp4l .B ptp4l
@ -170,7 +170,7 @@ The default is 0 (disabled).
.B fault_reset_interval .B fault_reset_interval
The time in seconds between the detection of a port's fault and the fault The time in seconds between the detection of a port's fault and the fault
being reset. This value is expressed as a power of two. Setting this being reset. This value is expressed as a power of two. Setting this
value to -128 or to the special key word "ASAP" will let the fault be value to \-128 or to the special key word "ASAP" will let the fault be
reset immediately. reset immediately.
The default is 4 (16 seconds). The default is 4 (16 seconds).
.TP .TP
@ -350,7 +350,7 @@ The default is 0.0.
.B pi_proportional_exponent .B pi_proportional_exponent
The kp_exponent constant in the formula used to set the proportional constant of The kp_exponent constant in the formula used to set the proportional constant of
the PI controller from the sync interval. the PI controller from the sync interval.
The default is -0.3. The default is \-0.3.
.TP .TP
.B pi_proportional_norm_max .B pi_proportional_norm_max
The kp_norm_max constant in the formula used to set the proportional constant of The kp_norm_max constant in the formula used to set the proportional constant of

View File

@ -1,7 +1,7 @@
.TH TIMEMASTER 8 "October 2014" "linuxptp" .TH TIMEMASTER 8 "October 2014" "linuxptp"
.SH NAME .SH NAME
timemaster \- run NTP with PTP as reference clocks timemaster - run NTP with PTP as reference clocks
.SH SYNOPSIS .SH SYNOPSIS
@ -138,7 +138,7 @@ default value is 0 (1 second).
Specify the maximum assumed roundtrip delay to the primary source of the time Specify the maximum assumed roundtrip delay to the primary source of the time
in this PTP domain. This value is included in the distance used by in this PTP domain. This value is included in the distance used by
\fBchronyd\fR in the source selection algorithm to detect falsetickers and \fBchronyd\fR in the source selection algorithm to detect falsetickers and
assign weights for source combining. The default value is 1e-4 (100 assign weights for source combining. The default value is 1e\-4 (100
microseconds). With \fBntpd\fR, the \fBtos mindist\fR command can be used to microseconds). With \fBntpd\fR, the \fBtos mindist\fR command can be used to
set a limit with similar purpose globally for all time sources. set a limit with similar purpose globally for all time sources.
@ -209,7 +209,7 @@ Specify the path to the \fBphc2sys\fR binary. The default value is
.TP .TP
.B options .B options
Specify extra options that should be added to all \fBphc2sys\fR command lines. Specify extra options that should be added to all \fBphc2sys\fR command lines.
By default, \fB-l 5\fR is added to the command lines. By default, \fB\-l 5\fR is added to the command lines.
.SS [ptp4l] .SS [ptp4l]
@ -221,7 +221,7 @@ search for the binary in \fBPATH\fR.
.TP .TP
.B options .B options
Specify extra options that should be added to all \fBptp4l\fR command lines. By Specify extra options that should be added to all \fBptp4l\fR command lines. By
default, \fB-l 5\fR is added to the command lines. default, \fB\-l 5\fR is added to the command lines.
.SS [ptp4l.conf] .SS [ptp4l.conf]
Settings specified in this section are copied directly to the configuration Settings specified in this section are copied directly to the configuration
@ -288,8 +288,8 @@ iburst 1
[ptp_domain 0] [ptp_domain 0]
interfaces eth0 eth1 interfaces eth0 eth1
ntp_poll 0 ntp_poll 0
phc2sys_poll -2 phc2sys_poll \-2
delay 10e-6 delay 10e\-6
ptp4l_option clock_servo linreg ptp4l_option clock_servo linreg
ptp4l_option delay_mechanism P2P ptp4l_option delay_mechanism P2P
@ -309,7 +309,7 @@ driftfile /var/lib/chrony/drift
[ntpd] [ntpd]
path /usr/sbin/ntpd path /usr/sbin/ntpd
options -u ntp:ntp options \-u ntp:ntp
[ntp.conf] [ntp.conf]
restrict default nomodify notrap nopeer noquery restrict default nomodify notrap nopeer noquery
@ -319,7 +319,7 @@ driftfile /var/lib/ntp/drift
[phc2sys] [phc2sys]
path /usr/sbin/phc2sys path /usr/sbin/phc2sys
options -l 5 options \-l 5
[ptp4l] [ptp4l]
path /usr/sbin/ptp4l path /usr/sbin/ptp4l