linuxptp/gPTP.cfg

[global]
#
# Default Data Set
#
twoStepFlag		1
slaveOnly		0
priority1		248
priority2		248
domainNumber		0
clockClass		248
clockAccuracy		0xFE
offsetScaledLogVariance	0xFFFF
free_running		0
freq_est_interval	1
#
# Port Data Set
#
logAnnounceInterval	1
logSyncInterval		-3
logMinPdelayReqInterval	0
announceReceiptTimeout	3
syncReceiptTimeout	3
delayAsymmetry		0
fault_reset_interval	4
neighborPropDelayThresh	800
#
# Run time options
#
assume_two_step		1
logging_level		6
path_trace_enabled	1
follow_up_info		1
tx_timestamp_timeout	1
use_syslog		1
verbose			0
summary_interval	0
kernel_leap		1
check_fup_sync		0
#
# Servo options
#
pi_proportional_const	0.0
pi_integral_const	0.0
pi_proportional_scale	0.0
pi_proportional_exponent	-0.3
pi_proportional_norm_max	0.7
pi_integral_scale	0.0
pi_integral_exponent	0.4
pi_integral_norm_max	0.3
pi_offset_const		0.0
pi_f_offset_const	0.0000001
pi_max_frequency	900000000
clock_servo		pi
sanity_freq_limit	200000000
#
# Transport options
#
transportSpecific	0x1
ptp_dst_mac		01:80:C2:00:00:0E
p2p_dst_mac		01:80:C2:00:00:0E
uds_address		/var/run/ptp4l
#
# Default interface options
#
network_transport	L2
delay_mechanism		P2P
time_stamping		hardware
ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 07:03:31 +08:00			`[global]`
Add a default configuration file for 802.1AS aka gPTP. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-07-27 19:05:30 +08:00			`#`
			`# Default Data Set`
			`#`
			`twoStepFlag 1`
			`slaveOnly 0`
			`priority1 248`
			`priority2 248`
			`domainNumber 0`
			`clockClass 248`
			`clockAccuracy 0xFE`
			`offsetScaledLogVariance 0xFFFF`
Add an option to configure a free running local clock. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 22:41:36 +08:00			`free_running 0`
Add an option to dial the frequency estimation interval. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 23:14:15 +08:00			`freq_est_interval 1`
Add a default configuration file for 802.1AS aka gPTP. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-07-27 19:05:30 +08:00			`#`
			`# Port Data Set`
			`#`
			`logAnnounceInterval 1`
			`logSyncInterval -3`
			`logMinPdelayReqInterval 0`
			`announceReceiptTimeout 3`
Add a configuration file option for the sync receive timeout. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2013-08-26 20:36:49 +08:00			`syncReceiptTimeout 3`
Add asymmetry correction. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> 2012-12-10 21:39:08 +08:00			`delayAsymmetry 0`
Make the fault reset interval a per-port configuration parameter. A timeout of 15 seconds is not always acceptable, make it configurable. By popular consensus, instead of using a linear number of seconds, use the 2^N format for the time interval, just like the other intervals in the PTP data sets. In addition to numeric values, let the configuration file support 'ASAP' to have the fault reset immediately. [RC - moved the handling of special case tmo=0 and added a break out of the fd event loop in case the fds have been closed. - changed the linear seconds option to log second instead. - changed the commit message to reflect the final version. ] Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2013-01-30 23:28:54 +08:00			`fault_reset_interval 4`
Implement neighborPropDelayThresh check in port_capable() Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com> 2013-03-14 03:16:59 +08:00			`neighborPropDelayThresh 800`
Add a default configuration file for 802.1AS aka gPTP. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-07-27 19:05:30 +08:00			`#`
			`# Run time options`
			`#`
			`assume_two_step 1`
ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 07:03:31 +08:00			`logging_level 6`
Add a configuration option to control the path trace mechanism. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-07 15:16:19 +08:00			`path_trace_enabled 1`
Add a configuration option to control the follow up info TLV. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-09 02:16:47 +08:00			`follow_up_info 1`
ptp4l: Use poll() instead of a try-again loop This patch modifies sk_receive in order to use poll() on POLLERR instead of the tryagain loop as this resolves issues with drivers who do not return timestamps quickly enough. It also resolves the issue of wasting time repeating every microsecond. It lets the kernel sleep our application until the data or timeout arrives. This change also replaces the old tx_timestamp_retries config value with tx_timestamp_timeout specified in milliseconds (the smallest length of time poll accepts). This does have the side effect of increasing the minimum delay before missing a timestamp by up to 1ms, but the poll should return sooner in the normal case where a packet timestamp was not dropped. This change vastly improves some devices and cleans the code up by simplifying a race condition window due to drivers returning tx timestamp on the error queue. [ RC - removed the unused 'try_again' variable. ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> 2013-04-05 23:52:14 +08:00			`tx_timestamp_timeout 1`
ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 07:03:31 +08:00			`use_syslog 1`
			`verbose 0`
Add summary statistics. Add new options to ptp4l and phc2sys to print summary statistics of the clock instead of the individual samples. [ RC - Fix () function prototype with (void). - Use unsigned for sample counter. - Fix over-zealous line breaks. ] Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2013-02-08 02:56:53 +08:00			`summary_interval 0`
Add options to not apply leap seconds in kernel. Add kernel_leap option for ptp4l and -x option for phc2sys to disable setting of the STA_INS/STA_DEL bit to slowly correct the one-second offset by servo. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> 2013-03-08 00:27:33 +08:00			`kernel_leap 1`
Add a configuration file option for the extra sync-fup check. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2013-08-29 17:01:27 +08:00			`check_fup_sync 0`
ptp4l: update the configuration files this patch updates the default.cfg and gPTP.cfg to show the new defaults Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> 2012-09-29 02:46:05 +08:00			`#`
			`# Servo options`
			`#`
Add a default configuration file for 802.1AS aka gPTP. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-07-27 19:05:30 +08:00			`pi_proportional_const 0.0`
			`pi_integral_const 0.0`
Adjust constants of PI servo according to sync interval. Instead of using fixed constants, set them by the following formula from the current sync to allow good performance of the servo even when the sync interval changes in runtime and to avoid instability. kp = min(kp_scale * sync^kp_exponent, kp_norm_max / sync) ki = min(ki_scale * sync^ki_exponent, ki_norm_max / sync) The scale, exponent and norm_max constants are configurable. The defaults are chosen so there is no change to the previous default constants of the servo with one second sync interval. The automatic adjustment can be disabled by setting the pi_proportional_const and pi_integral_const options to a non-zero value, but stability of the servo is always enforced. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> 2013-06-28 23:09:14 +08:00			`pi_proportional_scale 0.0`
			`pi_proportional_exponent -0.3`
			`pi_proportional_norm_max 0.7`
			`pi_integral_scale 0.0`
			`pi_integral_exponent 0.4`
			`pi_integral_norm_max 0.3`
Replace spaces with tabs in configs. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> 2013-04-11 02:07:49 +08:00			`pi_offset_const 0.0`
ptp4l: add support for using configured_pi_f_offset servo option This patch adds support for using the configured_pi_f_offset servo option to ptp4l. If "pi_f_offset_const 0.0" is specified in the config file, stepping on the first update is prevented. If any other positive value is specified, stepping on the first update occurs when the offset is larger than the specified value. change since v1 - add the new option to default.cfg and gPTP.cfg Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com> 2013-06-25 08:46:16 +08:00			`pi_f_offset_const 0.0000001`
Add option to set maximum frequency adjustment. The option sets an additional limit to the hardware limit. It's disabled if set to zero. The default is 900000000 ppb. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> 2013-04-11 02:07:48 +08:00			`pi_max_frequency 900000000`
Replace spaces with tabs in configs. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> 2013-04-11 02:07:49 +08:00			`clock_servo pi`
Add clock sanity check. Check the sanity of the synchronized clock by comparing its uncorrected frequency with the system monotonic clock. When the measured frequency offset is larger than the value of the sanity_freq_limit option (20% by default), a warning message will be printed and the servo will be reset. Setting the option to zero disables the check. This is useful to detect when the clock is broken or adjusted by another program. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> 2013-10-23 00:57:15 +08:00			`sanity_freq_limit 200000000`
Add a default configuration file for 802.1AS aka gPTP. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-07-27 19:05:30 +08:00			`#`
			`# Transport options`
			`#`
			`transportSpecific 0x1`
			`ptp_dst_mac 01:80:C2:00:00:0E`
			`p2p_dst_mac 01:80:C2:00:00:0E`
Introduce a configuration file option for the server's UDS address. Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2013-09-30 02:57:00 +08:00			`uds_address /var/run/ptp4l`
ptp4l: update the configuration files with the new defaults and sections Update the configuration files for gPTP and default so that they show more of the options as well as use suitable defaults for each style. -v2 * Add [global] to gPTP.cfg [ RC - also add logging_level, verbose, and use_syslog - use time_stamping, not timestamping ] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> 2012-08-21 07:03:31 +08:00			`#`
			`# Default interface options`
			`#`
			`network_transport L2`
			`delay_mechanism P2P`
			`time_stamping hardware`